Operating hours: 39816 ( as of 26.05.2020)
STAMA MC531 / X1000 – TWIN
Main spindle HSK A63
spindle speed: 12.000 1/min
Main spindle drive 37kw
spindle distance 266 mm
Traversing range
X-axis 1000 mm
Y-axis 400 mm
Z-axis 400 mm
Feed forces
X-Y-axis 4000 N
Z-axis 8000 N
Speeds
rapid traverse X-Y-Z axis 60m / min
feed X-Y-Z axis 1-10000 mm / min
axis dynamics X=6.0, Y=9.0, Z=11.0 m/sec²
Tool magazine
2×60 tool places
max tool length 300mm
max tool diameter 880mm
Measuring system
X-Y-Z axis Dig. encoder Resolution 0.001
Machine colour according to special specification
RAL 7035
Machine control Siemens 840D
NCU 572
Hard disk ( 10 Gigabyte for user data)
USB 2,0 interface
Analysis tool for service Ethernet card is included
Display 10,4″ TF color
Expansion slots 2x PCI, 1x CF Card
” Coolant cleaning paper 500 l / min
Internal bed filter built on
900 l coolant tank
Filter peak width 490m m
Filter capacity oil 350 l / min
Average filtration 50 micron
Field device for paper shortage
suitable for all common materials
This filtration does not prevent
muddying of the coolant system”.
“Immersion recooling unit
Compressor recooling unit for medium emulsion
or oil
Air cooled Refrigerant CFC free
Cooling capacity 34 MJ
Installed in 900 l coolant tank incl.
all necessary control and regulating
control devices.
Coolant supply IK 70 bar instead of 20 bar
IKZ through working spindles for tool post DIN 69
