ST TA150 ASPI COEX SECO Blow Molder – Year 2008
| Year | 2008 |
|---|---|
| Make | ST |
| Model | TA150 ASPI COEX SECO |
| ST TA150 ASPI COEX SECO | Blow Molder |
| Type of Blow Molder | Co-Extrusion Accumulator Head |
|---|---|
| Closing Force | 15.29 Tons |
| Minimum Mold Thickness | 12.20″ |
| Max Opening | 39.37″ |
| Floor Opening Space | 13.78″ x 2 |
| Dimensions of Floor B x H | 27.55″ x 31.49″ |
| (2) Extruders | . |
| Screw Size | 60mm & 70mm |
| L/D Ratio | 24:1 |
| Estimate Output (HDPE) | 180 lbs/hour (60mm) & 340 lbs/hour (70mm) |
| Heads | . |
| Shot Size Capacity | 0.5, 0.75, 1.0, 1.5 |
| Maximum HDPE Extrusion Weight (kg x 2) | 0.4, 0.6, 0.8, 1.2 |
| Min. & Max Die Diameter | 19″ – 2.36″ |
| Weights | 21 Min. & 23 Max Tonnage |
| Length | 342″ Length (L) and 173.22″ Length (B) |
| Height | 196.85″ |
| Note | Very Low Hours, Currently In Operation for Inspections |
FEATURES
| Anthropomorphic Robot and Parison Marker | Spare Parts for Resistors/ Pin / Dies |
