Spinner VC 450 – Year 2006
Performance Machining Center Spinner VC450 with Siemens/840D-SolutionLine V2
with control Siemens 840D-SolutionLine and colour screen 15″.
With graphic user interface for workshop programming Siemens “Shop-Mill” / Combi-Drive
WITH NEW SHOP-MILL SOFTWARE STANDARD “OPERATE”, available only for the new Siemens 840D-SolutionLine
generation of controllers !
Milling spindle up to 15.000 1/min “In-Line” direct drive
Power 6 kW (S6/40%)
Travel X=450mm Y=400mm Z=400mm; 36m/min
tool cone size 40 according to DIN 69871-A, tightening bolts according to DIN 69872-A
Blow-out device for spindle cones
High-Speed automatic tool changer as double arm changer for 24 tools
Linear guidance in all three axes
Required set-up elements on the machine bed for adjustment
Splash guard full cladding + coolant equipment + workspace light
Documentation: Spinner manual and Siemens manuals in digital form on CD-ROM
Lacquering two-coloured RAL 7035/5008
Chip conveyor V2 VC450/VC750
mounted on the coolant tank instead of the chip containers. Exiting to the right.
Scraper belt conveyor suitable for short milling chips.
Preparation for high pressure flushing VC450/VC750/VC800/VC1000/1200/MVC1000/MVC1100/MVC1300/MVC1600
Coolant transfer into tool according to DIN69871A (cone centre)
to be ordered in case of a later desired retrofitting of the flushing
This position is necessary for mounting the high pressure tank / high pressure flushing 116353 (70bar) or 126015/116556(26 bar)
