SPINNER TC600-65-SMCY CNC Turning Center – Year 2023
Manufacturer: SPINNER
Model: TC600-65-SMCY
Year of construction: 2023
Condition: as good as new (ex-display)
SPINNER TC600 with travel X=275mm Z=700mm
in 45-degree inclined bed design
with hardened and ground slideways
equipped as a TWO-PINDLE TURNING MACHINE with turret
WITH driven tools, Y-axis and counter spindle
indexing turret – WITH driven tool stations
all tool stations can be driven on turret wheels with a pitch circle or on an inner pitch circle
Tool holder on turret system BMT45
Number of tool stations in the turret : 16
SPINDLE 1 to 4,000 rpm – 65mm
Motor spindle, with water cooling, bar capacity 65mm,
speed range 0-4.000 rpm , Pmax 34 kW / 325Nm
Spindle nose DIN55026/A8
POWER CHUCK make SMW-Autoblok
D=250mm 3-jaws, model BHD
Set of soft jaws
Set of hardened jaws
PRESSURE AIR NOZZLE Spindle 1
SPINDLE 2 up to 6,000 rpm
Motor spindle, with water cooling
Speed range 0-6,000 rpm , Pmax 15 kW / 96Nm
POWER CHUCK make SMW-Autoblok
D=165mm 3-jaw, model BHD
Set of soft jaws
PRESSURE AIR NOZZLE Spindle 2
SPINDLE PURGE Spindle 2 for cooling lubricant
DIRECT MEASUREMENT SYSTEM in X-axis
SIEMENS 840DE control system with the following basic features:
– SPINNER – SPIOS 24″ touch control panel for I4.0 applications
– Control panel height-adjustable, rotatable and tiltable for optimum ergonomics
– incl. engraving cycles
– 24″ liquid crystal flat color screen with multi-touch functionality
– 2 GB user memory
– 15 zero offsets
– 1 free USB interface
– Ethernet interface standard
SHOPTURN
4-axis machining
3D-SIMULATION of the finished part
RESIDUAL MATERIAL DETECTION
DXF reader
Energy-saving function incl. automatic machine shutdown
LATE PROMOTION
HIGH PRESSURE PUMP 15 bar
CARTRIDGE FINE FILTER
HOLDER FOR MEASURING BUTTON (without button)
DOOR AUTOMATION for work area door
UNIROB universal robot interface
ATTENTION: If external automation systems not supplied by SPINNER are installed, the CE marking for the system expires and the entire system must be recertified. This is the responsibility of the automation partner.
STANDARD DOCUMENTATION GERMAN
Operating voltage 3x400V +/-10%
Mains frequency 50Hz (+/-2%)
TN mains (5-wire)
PACKAGING
