| Axis X | 850 mm |
|---|---|
| Axis Y | 560 mm |
| Axis Z | 650 mm |
| Rotary table (4th axis) | no |
| Type of CNC | Fanuc Oi MD |
| Table length | 1000 mm |
| Table width | 500 mm |
| Max. part weight | 600 kg |
| Number of tool pockets | 24 |
| Spindle taper | ISO40 |
| Max. spindle speed | 10000 rpm |
| Spindle motor power | 11 kW |
| Length x width x height | 3000.0 × 2565.0 × 2944.0 |
| Weight | 6800 kg |
| Worked hours | 3216 hours |
Table:
Dimensions mm 1,000 x 500
T-slots mm 18 x 5
Max. load kg 600
Feeds:
X mm 850
Y mm 560
Z mm 650
Max. spindle distance from table mm 800
Min. spindle distance from table mm 150
Spindle:
Spindle type SK 40
Max. 10,000 rpm
Max. torque S3 / S1 100% ED (Fanuc) Nm 96/53
Engine power S3 / S1 100% ED (Fanuc) kW 15/11
Rapid traverses:
X / Y / Z axis rapid traverse mm / min 32000/32000/30000
Feed rate mm / min 20000
Tool magazine:
Number of tools pcs 24
Exchange 2.5 sec.
Max. tool diameter 80/125 mm
Max. tool length 250 mm
Max. tool weight 7 kg
Accuracy:
Positioning accuracy JISB6300 mm +/- 0.005 / 300
Repeatable accuracy JISB6300 mm +/- 0.003
Total power consumption
kVA 25
Compressed air supply
MPa 0.5 – 0.7
Dimensions
Height mm 2,944
Floor area (width x depth) mm 3,000 x 2,565
Weight kg 6,800
Control system
Fanuc 0i-MD
Gear:
FANUC 0i-MD system, β 11kW main engine
Chip extractor – chain type
Oil pan from coolant level
Tool magazine – disk type – number of places in the magazine 24
Spindle taper: BT / SK40
Ethernet interface, USB, SD card,
Control center protection
Automatic lubrication
Prestressed ball screws
Heat extractor for el. cabinet
Waterproof protection
Dustproof electrical cabinet
Three-color light signaling of the machine – operating lamp
External cooling of tool and workpiece
Operation manual
Transformer
CE standards (including roof security)
Engine control and adaptation for 10,000 rpm
Spindle speed 10,000 rpm
Renishaw wireless workpiece and tool probe
(RPS workpiece probe, 3TS tool probe, INT radio receiver)
Spindle cooling 20 bar
Water gun
Fourth axis interface (preparation)
Put into operation: 12/2017
Spindle running: 3216 hours – one shift only
