Table / Pallet Indexing: 0.001

Horizontal Table/Pallet Size in mm: 400mm

Number of Pallets: 2

X-Travel: 22″

Y-Travel: 22″

Z-Travel: 27″

Rapid Traverse: 2480 IPM

Cutting Feed Rate: 1575 IPM

Spindle Taper Type: Other

Spindle Taper – Other: 7/24 #40

Spindle Speed: 15,000 RPM

Spindle Motor: 50 HP

Tool Magazine Capacity: 116

Tool Changer Type: Arm

Tool Change Time: 1.4 seconds

Chip-to-Chip Time: 3 seconds

Control Make/Model: Fanuc Series 31i-Model B CNC Control

Machine Options: Transformer;Automatic Pallet Changer;Splash Guards;Oil Chiller

Additional Machine Specs: Minimum Index, Built in Rotary Table: 0.001 degree
Spindle Center to Pallet Surface: 3.15″ – 25.2″
Spindle Gage Line to Pallet Center: 1.97″- 29.13″
Pallet Change Time, Two Station APC: 9.0 sec (JIS)
Spindle Ranges, Automatic Selection Electrical 2 Steps
Spindle Bearings Bore Diameter: 2.76″
Spindle Bearings Lubrication Oil & Air
Spindle Torque Maximum: 184 ft-lbs. (10%ED)
Axis Motor, Digital Servo X/Y/ Z Axes: 7.5 HP
Axis Thrust Maximum X Axes: 4108 lbs.
Axis Thrust Maximum Y/Z Axes: 3081 lbs.
Magazine, Cassette Tool Pot Type (Includes Spindle): 60
Tool Shank Cat ” V ”
Tool Change System: Double Swing Arm
Tool Selection Address Fixed Random Method
Coolant Pressure: 64 PSI
Coolant Spindle Nozzles: 6
Ceiling Shower Nozzles: 14
Positioning, Digital Encoder: +/- 0.000098″
Repeatability, Digital Encoder: +/- 0.000059″
Indexing Accuracy/Positioning: +/-. + / – 2.50 sec
Pallet Positioning Repeatability: + / – 0.00039″

Coil Chip Conveyors (2), Left and Right Side of Pallet
Coolant Shower Flush
Four Tapered Cone Pallet Positioning
Fully Enclosed Automatic Splash Guards
Heavily Ribbed One Piece T-Shaped Bed Construction
Large Linear Cross-Roller Guides – Auto Grease Lubrication
Magazine Interrupt Function
Metal Shutters on X, Y, and Z Axes
Operator’s Splash Guard Door with Safety Interlock
Spindle Oil Cooler
Lift Up Conveyor Hinge Belt
116 Tool Magazine (60×2)
Additional Pallet Tapped Type
MH250 Turbo Mixed Materials Lift Up Aluminum Fine
Chips and Coarse, and Stringy
Air Blow Nozzle
Additional M Code, (8) Sets
Coolant Spray Gun 0.25 kw Pump
BT Tooling Retrofit Cost (Return of CAT40 Arm Required)
Constant Hydraulic Fixture Coupling
NC-4 Split Beam Automatic Tool Length/and Diameter
Measure System
Tool Monitoring Systems Soft AC – Adaptive Control Function
Tool Breakage Detection in the Magazine

Coolant Types: Thru-Spindle Coolant

Coolant PSI: 1,000 PSI

Chip Removal: Chip Conveyor

Probe Make/Model: T1-A Renishaw OMP60 Probe and Software