Schaublin 125-CCN – Year 1994
CNC LATHE

CNC control unit: FANUC

MACHINE STATUS: USED ( TO REPLACE BATTERIES AND RESTORE ZERO ENCODERS)

TECHNICAL FEATURES:
Numerical Control: GE Fanuc Series 20-T;
CAPACITY’
Center height: 125 mm;
Maximum distance between centers: 500 mm;
Diameter allowed above the bench: Ø 270 mm;
Diameter allowed above the trolley: Ø 130 mm;
Spindle boring allowed diameter: Ø 28 mm;
Diameter allowed for the B32 collet: Ø 24 mm;
Maximum spindle diameter: Ø 150 mm;
FANTINA
Spindle nose: CAMLOCK D1-3 “;
Clamps used: B 32 or B 32 UP;
AC motor power at 50% / 100% DE: 7.5 / 5.5 kW;
TABLE-CART
Cross travel, X axis: 180 mm;

Longitudinal travel, Z axis: 410 mm;
Resolution of the X axis at the radius: 0.0005 mm;
Resolution of the Z axis: 0.001 mm;
Maximum cross section: 16 x 16 mm;
PROMOTIONS
Advances on the two axes without intermediate stages: 0 – 5000 mm / min;
Feed forces on the two axes: 500 daN;
Fast forward on both axes: 7.5 m / min;
PNEUMATIC CLAMPING CYLINDER
Maximum adjustable clamping force: 600 daN;
CROSS COUNTERFEITER (Accessory)
Spindle taper: BIT 3;
Spindle external diameter: Ø 45 mm;
Longitudinal stroke of the spindle: 160 mm;
PNEUMATIC CONTROLLED SUPPORT COUNTER (Optional)
Spindle taper: BIT 3;
Longitudinal stroke of the spindle: 60 mm;
Adjustable support force: 40 – 220 kp;
ENGINES
Spindle motor: (76200.9003)
Power: 7.5 / 5.5 kW;
Maximum speed: 6000 rpm;
Z axis motor: (76200.9002)
Power: 0.45 kW;
Maximum speed: 1500 rpm;
X-axis motor: (76200.9002)
Power: 0.45 kW;
Maximum speed: 1500 rpm;
Coolant pump motor: (76808.0000)
Power: 0.14 kW;
Speed: 2900/3000 rpm;
Refrigerant tank capacity: 55 l;
MACHINE WEIGHT
Approximate weight of the machine: 1415 kg;
OVERALL
Machine dimensions (Lxhxl): 1700 x 1650 x 1000 mm;
SOUND EMISSIONS UNDER CHARGE (Measurement 1 m from the protection, at the point where the operator is located): 72 db;
Year: 1994;
CE machine