Technical specifications:

capacity

TSUGAMI B0126E-III
Rod diameter Ø 3 mm ~ Ø 12 mm
Max. Machining length 210 mm / 80 and 170 mm for rot. Guide bush

Main spindle Max. Drilling Ø 7 mm
Max. Thread Ø M6 x 1
Counter spindle Max. Bar Ø Ø 12 mm
Max. Drilling Ø 7 mm
Max. Thread Ø M8 x 1
Cross slide front Max. Drilling Ø 6 mm
Max. Thread Ø M5 x 0.8
Max. Disc diameter –
Cross machining
back Max. drilling Ø 6 mm
Max. Thread Ø M5

 

Spindles, tools and axes

TSUGAMI B0126E-III
Main spindle speed 200 ~ 12,000 min-1
Counter spindle speed 200 ~ 12,000 min-1
Live tools / main page 200 ~ 8,000 rpm
Live tools / rear side 200 ~ 8,000 min-1
Main spindle positioning C-axis
Counter spindle positioning C-axis
Number of tools cross slide turning 6
Driven 3
Drilling 4 + 4 (front / back)
Number of tools on the rear side Drilling 4 x on the front
number of
Tools rear side Driven 2 x front side / 2 x across
Turning holder shaft dimensions 12 x 12 x 85 mm
Rapid traverse 32 m / min (X1 24 m / min)
Controlled axes 8 axes

Drive power

TSUGAMI B0126E-III
Main spindle 1.5 / 2.2 kW
Counter spindle 1.5 / 2.2 kW
Driven Tools / main page 0.50 kW
Driven Tools / rear side 0.75 kW
Axes (X1, X2, Y1, Y2, Z1, Z2) 0.50 kW
Coolant pump 0.18 kW
Central lubrication pump 3 W

Physical data

TSUGAMI B0126E-III
Net weight approx. 1,750 kg
Connected load 11 kVA
Compressed air connection 4 bar and more
Compressed air consumption 30 NL / min
Tank capacity 115 liters
Height of the spindle center from the floor approx. 1,000 mm
Height of the machine 1,700 mm
Length of the machine 1,640 mm
Width of the machine 1,120 mm

Electrical connections

200 V, 50 Hz, 3 phases
Main transformer, input voltage 400 volts
Output voltage 200 volts

control
CNC path control FANUC 32i-B
2-channel control
LCD color monitor 10.4 ”

Memory card
RS232 interface
USB interface
Ethernet interface

Standard accessories

chip conveyor
Counter spindle flushing with pneumatic ejector
Work area lighting
Signal light red / yellow / green
Parting tool breakage monitoring (speed monitoring)
Conversion kit between long and short turning

Coolant device
– a coolant pump 750 W
– movable jet arms

Part catcher
Swiveling parts catcher with conveyor belt to the right
Easy to switch to front or rear removal

interface
Interface for loading magazine

Power clamping system
Collet adapter type Schaublin 76-71 F22
Collet on main spindle 140E (Schlenker clamping tools)

Driven guide bush TF 26 Meister CH
99.001 new comm CH

Collet adapter type Schaublin 76-71 F22
Collet on counter spindle 140E (Schlenker clamping tools)

Collets and guide bushes are not included in the scope of delivery!

Tool holders and tools
1 tool box with set-up tools
Clamping pieces for tool holders (external machining)
coolant distribution pieces

Special accessories
Execution variable as short or long turning EUR incl.
Counter spindle flushing including pneumatic ejector EUR incl.
Swiveling parts catcher with conveyor belt to the right EUR incl.
Chip conveyor to the right EUR incl.
3 driven tool holders on the front cross slide EUR incl.
C-axis on main and counter spindle EUR incl.
4 pieces (2 x transverse) driven tools on the back EUR incl.
C-axis on main and counter spindle EUR incl.
Pressure booster pump 16 bar including chip filtration

Tsugami B0126E-II – Year 2020