| X Axis | 6400 mm |
|---|---|
| Y Axis | 2500 mm |
| Z Axis | 1570 mm |
| Jig type | no |
| Table length | 2200 mm |
| Table width | 2200 mm |
| Piece weight | 16000 kg |
| Spindle diameter | 130 mm |
| Max. spindle speed | 8000 rpm |
| Overhauled | yes |
| Year of overhauling | 1998 |
WD 130 A, GO 1998 boring machines:
Technical data:
Travel
X axis – adjustment of the stand along the bed 6400 mm
Y axis – vertical adjustment of the headstock 2500 mm
Z axis – horizontal headstock extension 450 mm
W axis – working spindle extension 1120 mm
B axis – 360 ° table rotation range
Working feed in the X, Y, W axis 2 m / min
Working feed in the Z axis 1 m / min
Rapid traverse in X, Y axis 2.88 m / min
Rapid traverse in the Z axis 1.35 m / min
Rapid traverse in the W axis 2.7 1 / min
Spindle
Working spindle diameter 130 mm
ISO 50 tool taper
Max. speed 900 1 / min
Power 22 kW
Max. torque 8000 Nm
Table
Working area 2200×2200 mm
Width x pitch of T-slots 28×250 mm
Max. load 16000 kg
Centering hole diameter 300 H7 mm
Power supplies
Rated mains voltage 3×400 V / 50 Hz
Operating power 30 kVA
Special accessories:
Heidenhain POSITIP 855 digital display
Chip extractor CDT 063 C
Touch probe KT 130
Rotary table E20
Clamping plates 2x 4000x2000x400
Tooling equipment
Technical documentation of the machine
Technical documentation of the base under the machine
Total weight of the machine incl. special accessories approx. 35,000 kg
Machine in very good condition, rulers
TOS WD 130A
