Salvagnini L3-30 CNC Fiber Laser Machine 6000W
569 working hours
Last technical revision: 10.02.2023
6000W fiber laser source with cooling module
Max length: 3048mm
Max width: 1524mm
Z axis: 100mm
Maximum sheet weight: 750kg
Maximum cutting thickness
Mild steel: 25mm
Stainless steel: 20mm
Aluminum: 20mm
Copper 8mm
Comes with software:
PARTS.L – production management
ADDIN.SOLIDWORKS – integration between Solidworks and streamlaser
STREAMLASER – CAM and Nesting
VALUES.L – production cost estimate
Computer with Intel Xeon W-2123, Nvidia Quadro P2000, 16gb RAM
The machine is like new, in working condition
Salvagnini L3-30 CNC Fiber Laser Machine Technical data L3 (measurements in mm)
| Machine data | L3-30 | L3-40 | L3-4020 | L3-6020 |
| Working range | ||||
| X Y worktable | 3048×1524 | 4064×1524 | 4064×2032 | 6096×2032 |
| Z axis stroke | 100 | 100 | 100 | 100 |
| Maximum XY speed (m/min) | 156 | 156 | 156 | 156 |
| Accuracy1: | ||||
| Position accuracy Pa | 0.08 | |||
| Average position range Ps | 0.03 | |||
| Fiber laser source | 2000 W | 3000 W | 4000 W | 6000 W | 8000 W | 10000 W |
| Cutting capacity (thicknesses)2 | ||||||
| Steel (S185JR,S235JR, RAEX 250 C LASER) | 0.5-15 | 0.5-20 | 0.5-20 | 0.5-25 | 0.5-25 | 0.5-25 |
| Stainless steel (AISI 304, X5CrNi18-10 1.4301) | 0.5-10 | 0.5-12 | 0.5-15 | 0.5-20 | 0.5-25 | 0.5-30 |
| Aluminum (Al 99.5 EN AW 1050A) | 0.5-8 | 0.5-10 | 0.5-15 | 0.5-20 | 0.5-25 | 0.5-30 |
| Copper (Cu-ETP CW004A H040 EN1652) | 0.5-5 | 0.5-8 | 0.5-8 | 0.5-8 | 0.5-10 | 0.5-10 |
| Brass (CuZn37 CW508L H055 EN1652) | 0.5-5 | 0.5-6 | 0.5-8 | 0.5-8 | 0.5-10 | 0.5-10 |
| Consumption |
||||||
| Maximum power consumption (kW)3 | 16 kW | 18 kW | 21 kW | 28 kW | 34 kW | 42 kW |
| Average power consumption (kW)4 | 11 kW | 12 kW | 13 kW | 16 kW | 20 kW | 24 kW |
- Measure calculated following the norm VDI3441 on the maximum length of the axes.
- The quality of cuts on limit thicknesses will depend on the geometries required, the quality of the material and the operating conditions of the system. At the limit values, the cut may have burrs on the lower edge.
- Maximum consumption calculated on a system in a standard configuration cutting 3 reference sheets of mild steel between 0,8-6mm thickness.
- Average consumption calculated on a system in a standard configuration cutting 3 reference sheets of mild steel between 0,8-6mm thickness.
