Roundo R-6-S Hydraulic Angle Bending Roll
| Make | Roundo |
|---|---|
| Model | R-6-S |
| Roundo R-6-S | Angle Bending Roll |
| Angle Capacity Leg Out | 6″ x 6″ x 5/8″ @ 85″ |
|---|---|
| Angle Capacity Leg In | 5″ x 5″ x 3/4″ @ 85″ |
| T Leg Out | WT6 @ 60″ |
| Leg In | WT5 @ 65″ |
| T Leg Down | WT6 @ 60″ |
| Flat Bar Hard Way | 6″ x 1-1/2″ @ 70″ |
| Flat Bar Easy Way | 10″ x 2″ @ 40″ |
| Square Bar | 3-1/2″ @ 45″ |
| Round Bar | 4-3/8″ @55″ |
| Round Pipe Sch. 40 | 6″ @ 85″ |
| Square Tube | 5″ x 5/16″ wall |
| Beam on Flange | W12 x 35 @ 45″ / W8 x 31 @ 45″ |
| Channel Flange Out | C12 x 30 @ 40″ |
| Channel Flange In | C12 x 30 @ 45″ |
| Channel on Web | C7 x 12.25 @ 350″ |
| Rolling Speed | 23 FPM Max (Variable) |
| Roll Diameter | 18″ |
| Shaft Diameter | 7.1″ / 6.3″ |
| Main Motor | 20 HP |
| Voltage | 220 / 440 Volt 3 Phase |
| Dimensions | 77″ x 94″ x 66″ |
| Weight | 18,000 Lbs. |
