Renishaw Equator 300 CMM (Versatile Gauge) – Year 2020
Co-Ordinate Measuring Machine
Year: 2020
Condition: As New, Excellent Condition
Includes
Equator Shopfloor Controller Kit
Equator SM25-2U Probe Kit
Equator Joystick Kit
Equator Power Cable UK
Modus Equator
Equator Enclosure Kit
Equator Gauge Checker Kit
M6 EQ33 Modular Fixture Plate x 2
SH25-2A Stylus Holder x 3
Styli x 2
IPC Dongle with one Licence
Technical Specification
Working Volume X & Y: Ø300 mm
Working Volume Z: 150mm
Working Volume Height from Base: 55mm
Machine Weight: 25kg
Dimensions(without enclosure): 570 x 500 x 700mm
Comparison uncertainty*: ±0.002 mm
Probe type – scanning: Renishaw 3-axis SP25 analogue scanning
Maximum scanning speed: (SP25) 200 mm/s
Scanning rate (SP25): 1000 points/s
Probe type – touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger
Recommended touch speed (TP20): 10 mm/s
Maximum movement speed: 500 mm/s
Scale resolution: 0.0002 mm
Fixturing requirement*: ±1 mm
Machine air supply requirement: No air required
Operating temperature: +5 °C to +50 °C
Storage temperature: -25 °C to +70 °C
Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing
Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz
Maximum power consumption**: 190 W
Typical power consumption***: 80-100 W
Fixture plate: 305 mm × 305 mm aluminium
Maximum workpiece weight: 25 kg
Notes
* The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a
CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a
correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position
measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the master
part. This specification applies where each part is fixtured to within 1 mm relative to the master part.
** Peak consumption at power up.
*** 3-axis system typical consumption based on taking touch points under DCC control.
Specifications
Manufacturer Renishaw
Model Equator 300 CMM
Year 2020
Condition Used
Machine Type Co-Ordinate Measuring Machine
Year 2020
Condition As New, Excellent Condition
Working Volume Z 150mm
Machine Weight 25kg
Comparison uncertainty* ±0.002 mm
Maximum scanning speed (SP25) 200 mm/s
Scanning rate (SP25) 1000 points/s
Recommended touch speed (TP20) 10 mm/s
Maximum movement speed 500 mm/s
Scale resolution 0.0002 mm
Fixturing requirement* ±1 mm
Machine air supply requirement No air required
Maximum power consumption** 190 W
Typical power consumption*** 80-100 W
Maximum workpiece weight 25 kg
