CNC 5 axes milling center Reiden
Type RX 12
Year of construction 2019
Spindle hours 3300
Heidenhain TNC 640 with handwheel HR 510
Spindle HSK 100 Form A
Spindle speeds up to 12,000 rpm
5 axes simultaneously
Travel paths X/Y/Z 1300/1450/1000 mm
Travel A axis minus 1 to plus 90 degrees
NC rotary table 1200 x 1400 mm
Shrinkage circle continuous 1500 mm
shrinkage circle limited 1600 mm
Direct measuring system on all axes Heidenhain with sealing air
CTS 50 bar
Magazine with 103 places
Blum TC 60 measuring probe
Rotary table with direct drive for turning operations up to 400 rpm
Tool breakage control
Oil mist extraction
Pallet support table for manual pallet change by crane
Special shuttering analogous to 2-fold pallet changer
Manufacturer Catalogue Information about REIDEN RX12 :
General Specifications
| Working Range | Table Size | 47″ to 39″ (1,200 – 1,000 mm) |
| Axis Travel X | 51″ (1,300 mm) | |
| Axis Travel Y | 57″ (1,450 mm) | |
| Axis Travel Z | 39″ (1,000mm) | |
| Axis Travel A Spindle Head | -1 to 90 degrees | |
| Axis Travel C Table | 360 degree continuous | |
| Table | Table Weight Capacity | 5,500 lbs. (2,500 kg) |
| Table Swing | 59″ (1,500 mm) | |
| Turning Option Speed | 400 RPM | |
| Turning Option Power | 50 HP (38 kW) | |
| Ram (Rail Head) | Ram Size | 13.4″ x 13.4″ (340 x 340 mm) |
| Ram Size – Option | 15.7″ x 15.7″ (400 x 400 mm) | |
| Ram Travel | 79″ to 126″ (2,000 to 3,200 mm) | |
| Feed Rate/Rapid Rates | Linear Axis | 1968 IPM (50 M/min) |
| Linear Axis Acc/Dec | .6 G | |
| C Axis Table Feed | 30 RPM | |
| Automatic Tool Changer | Capacity | 73 – 191 tools |
| Automatic Pallet Changer | Capacity | 2 to 5 Pallet APC |
