| QUASER UX 500 C CNC 5-Axis Vertical Machining Center – Year 2022 | |
|---|---|
| Machine | QUASER UX 500 C – 5-Axis Universal Machining Center |
| Year | 2022 |
| Condition | Good (Used) |
| Control | SIEMENS S828D (PPU 290, 15″ Touchscreen) |
| Machine Number | 315D210043 |
| Spindle Hours | Approx. 1,500 Hours |
| SPINDLE | |
| Spindle Type | SIEMENS SK40 |
| Max Spindle Speed | 12,000 RPM |
| Spindle Power | 13.3 kW (17.8 HP) |
| Torque | 85 Nm |
| Cooling | Temperature-Controlled Spindle Cooling |
| Internal Coolant | 20 bar (290 PSI), 25 L/min (6.6 gal/min) |
| TOOLING SYSTEM | |
| Tool Changer | Double-Arm ATC |
| Tool Capacity | 48 Positions |
| Included Tool Holders | Approx. 70 Units (Partially Equipped) |
| MEASURING & PROBING | |
| Workpiece Probe | RENISHAW OMP 40-2 (3D Infrared) |
| Tool Measurement | OTS Toolsetter with Quick-Change Adapter |
| Additional Systems | Infrared Receiver, Kinematic Measurement Cycles |
| AXES & ACCURACY | |
| Axis System | 5-Axis (Simultaneous) |
| Linear Axes Measurement | High-Precision Glass Scales (X/Y/Z) |
| Rotary / Tilting Axes | Direct Measuring Systems |
| COOLANT & CHIP MANAGEMENT | |
| Flood Coolant | 75 L/min @ 3 bar (19.8 gal/min @ 43.5 PSI) |
| Chip Conveyor | Scraper Belt Type + Dual Augers |
| Chip Washdown | Integrated with Grundfos Pump |
| Filtration | Cartridge Filter 25 µm |
| ADDITIONAL EQUIPMENT | |
| 3D Simulation Software Network Drive Management Portable Electronic Handwheel Heat Exchanger for Control Cabinet Pneumatic Tool Change Door External & Internal Air Blast System Automatic Central Lubrication System Deublin Rotary Union Coolant Spray Gun Warm-Up Tool Signal Tower (3-Color) Fully Enclosed Safety Cabin with Sliding Doors 2 Work Area Lights |
|
| INCLUDED IN DELIVERY | |
| SCHUNK KSF3-250 2-Jaw Power Chuck Approx. 70 Tool Holders Chip Trolley Operating Manual & Documentation Machine Parameters (USB) |
|
| NOT INCLUDED | |
| Accessories Visible in Photos/Video (Unless Explicitly Listed) | |
