QS Group SF-VF-22-13-06 Thermoforming Machine – Year 2007
| Max sheet length | 2310 mm |
| Max sheet width | 1360 mm |
| Forming depth | 10 mm |
| Total power requirement | 76 kW |
Technical Sheet of Thermoforming Machine
Model: SF-VF-22-13-06p
Year 2007
Brand: QS Group
Status: For sale
Delivery time: Immediately
Description
This single station thermoforming machine is designed and built to meet the requirements of various production sectors, for small and medium productions of thermoplastic materials with thicknesses ranging from 1 mm to 10 mm and maximum dimension of plates up to 2310 x 1360 mm. This is a machine in very good working order.
• Maximum dimension of the plates: 2310 x 1360 mm
• Thickness of the plates: up to 10 mm
• Loading the plate and unloading the product: Manual
Mold holder table:
• Maximum stroke: 90 mm
• Maximum mold height: 600 mm
• Mold base height: 195 mm
• Closing force: 27 kN
• Contains: Stroke control with linear transducer, vacuum line for forming the part, water line for thermoregulation of the mold and air line for devices for critical demolding areas.
closing frame:
• Maximum plate: 2310 x 1360 mm
• Maximum opening with manual loading: 650 mm
• Closing force: 35 kN
Cooling electric fans: 6 fans with a motor power of 0.55 kW each
heating panels:
• Upper panel power: 76.05 Kw
• Resistors (ceramic): 117 of 650 W
• Lower panel power: 46.8 Kw
• Resistors (ceramic): 117 of 400 W
counter-mold:
• Maximum stroke: 1000 mm
• maximum counter-mold height: 700 mm
• Closing force: 12 kN
vacuum installation
• Tank capacity: 1300 l
• Pump flow: 200 M3 / h
• Motor power: 4 KW
Air installation:
• Operating pressure: 6 (+/-10%) bar
• Maximum absorption (approx): 1100 Nlt/cycle
Water installation:
• Operating pressure: 2.5 (+/- %) bar
• Consumption: 0.8 M3 / h
Electrical installation:
• Installed power: 150 Kw
• Three-phase electrical voltage + neutral + earth: 400 (+6%-10%) Vac
• Frequency: 50Hz
Heating system control
• Upper panel with regulation in percentage of each resistance.
• Lower panel with regulation in percentage of each pair of resistors.
Thermoforming cycles / software
• Standard: formed negative/positive, with/without counter mold
Safety protections and standards
• Standard manufacturing and safety regulations. Directive: 89/336 – 98/37/CE – 73/23 – en 12409/2001 and EN 292 standard.
