Proma PBP-400FA – Year 2019
Condition:New
| Table length | 1020 mm |
|---|---|
| Table width | 320 mm |
| Manual | Yes |
| CNC | Yes |
| CNC type | Siemens |
| Max piece weight | 1000 kg |
| Wheel diameter | 350 mm |
| Wheel bore | 40 mm |
| Max. wheel speed | 1450 rpm |
| Power | 5.5 kW |
| Weight | 3500 kg |
| Worked hours | 15 hours |
| Hours under power | 18 hours |
| State | new |
Magnetic table with electromagnet Magnetic table size 300×1000 mm Longitudinal feed rate 7-23 mm / min Transversal advance -working 0.1 – 8 mm – fast 990 mm / min – manual 0.02 mm / gradation Vertical advance -working 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm – fast 460 mm / min – manual 0.005 mm / gradation Abrasive disc speeds 1450min-1 The dimensions of the abrasive disc 350x40x127mm Electric motor power 5.5 kW motor Electric motor power vertical feed 0.5 kW Transverse feed electric motor power 0.04 kW Maximum load on the table 400 kg The height of the car is 1890 mm Disc balancing device yes Weight – mass 3500 kg Packaging – box dimensions (L x W x H) 2950x2220x2200 mm Standard equipment • Two-axis digital display • Grinding stones • Balancing wheel • Balancing stand • Magnetic plate for fixing • System for demagnetization • Cooling system • Centralized lubrication system • Local halogen lighting lamp • Tools for adjustment and assembly
Standard equipment
Two-axis digital display
Grinding stones
Balancing wheel
Balancing stand
Magnetic plate for fixing
System for demagnetization
Cooling system
Centralized lubrication system
Local halogen lighting lamp
Tools for adjustment and assembly
The feed is driven by a vertical servo motor, which is controlled by a PLC type control system, with display on the desk
V-shaped and flat guides on the directions of movement of the table
PTFE (polytetrafluoroethylene) coated table guides ensure a very good movement and support of the table, with a load capacity of up to 400 kg
Centralized lubrication system
Silent car, designed and made for intensive use
Bearing with high precision bearings, for the stone shaft
Quick adjustment of the desired working height
