Poreba TPL-90/3M Engine Lathe – Year 1988
POREBA 12-1/2″ HOLLOW SPINDLE ENGINE LATHE
MODEL: TPL90 3M, S/N: 1181-1197-044, MFG: 1988
SPECIFICATIONS:
SWING OVER BED ………………….. 36-1/2″
SWING IN REMOVABLE GAP …………… 45-2/7
SWING OVER CROSS SLIDE …………… 24-3/4″
SPINDLE NOSE CAMLOCK …………….. A1-20
HOLE THROUGH SPINDLE …………….. 12.5″
DISTANCE BETWEEN CENTERS …………. 120″
SPINDLE SPEED RANGE ……………… 5 TO 250 RPM
LONGITUDINAL FEED RANGE (70) ……… .0043 – .249 IPR
CROSS FEED RANGE (70) ……………. .0021 – .250 IPR
TOP SLIDE RANGE FEED (70) ………… .001 – .125 IPR
INCH THREADING RANGE (56) ………… .5 – 30 TPI
METRIC THREADING RANGE (62) ………. 1 – 60 MM
WIDTH OF BED ……………………. 23″
TAILSTOCK SPINDLE DIAMETER ……….. 5-1/8″
TAILSTOCK SPINDLE TAPER ………….. #6MT
TAILSTOCK SPINDLE TRAVEL …………. 11-3/4″
APPROXIMATE FLOOR SPACE…………… 74″ X 230″
APPROXIMATE WEIGHT ………………. 20,500 LBS.
EQUIPPED WITH:
– INCH & METRIC THREADING CAPABILITY
– TAPER TURNING ATTACHMENT
– POWER FEED TO THE TOP SLIDE
– (2) 4-JAW CHUCKS IN FRONT & REAR OF SPINDLE
– ALORIS QUICK CHANGE TOOLPOST
– LIVE CENTER
– THREAD DIAL INDICATOR
– COOLANT SYSTEM
– 6-WAY POWER & RAPID TRAVERSE
– TWO SPEED TAILSTOCK
– INDUCTION HARDENED & GROUND BEDWAYS
– 35 HORSE POWER MOTOR
INSPECT UNDER POWER
