Piranha HD510 – Year 2020
CNC Plasma Cutting System
Used 2020 Piranha Model HD510 Plasma Cutting System w/ HyperTherm XPR300 & UAS Dust Collector
STANDARD FEATURES
Rugged Construction – All-Welded Steel Frame (not bolt-together) with high accuracy linear guides and bearings. Machine is assembled complete at the factory
Dual Side Drive – gantry driven on both sides for maximum stability
CNC Control with Hypertherm Edge Connect
Panasonic servo motors and drives – Powerful 750-watt servo motors (not stepper motors) on both X-axis and Y-axis with a maximum traverse speed of 787 in/min.
Zoned Down draft exhaust system – with 6 zones
Hypertherm Sensor Torch Height Control – controls torch height automatically
Breakaway Torch Mounting – protects the torch from inadvertent part tip-ups
MACHINE SPECIFICATIONS
FEATURESPECIFICATION
Effecting Cutting Area63” x 122”
Maximum Material Thickness2”
Maximum Rapid Speed787 IPM
CNC ControlHypertherm MicroEdge Pro or Edge Connect
Frame and Bridge ConstructionWelded Tubular Steel
Drive MotorsX-axis – Two Servo Motors
Y-axis – Servo Motor
Torch Height Control – Hypertherm Sensor
Drive SystemX-axis – Rack and Pinion each side
Y-axis – Rack and Pinion
Z-axis – Ball Screw
Torch ControlArc Voltage with Initial Height Sensing
Torch ProtectionYes
Zoned Downdraft Table6 zones
AVAILABLE SIZES
MODELCUTTING AREA: 5′ x 10′
MACHINE SIZE 13’10” X 9’9”
HYPERTHERM XPR300
MATERIAL THICKNESSMAXIMUM CUTTING SPEED (MILD STEEL)
10 GA MS240 IPM @ 130A
1/4” MS200 IPM @ 170A
3/8” MS140 IPM @ 170A
1/2”MS155 IPM @ 300A
3/4” MS105 IPM @ 300A
1” MS75 IPM @ 300A
1-1/4” MS55 IPM @ 300A
1-1/2” MS40 IPM @ 300A
1-3/4” MS30 IPM @ 300A
2” MS21 IPM @ 300A Pierce start with OptiMix Console Edge start with Core Console
GAS TYPEAIRNITROGENOXYGEN
Gas Quality
Core & Optimix Consoles
Clean, dry, oil-free consistent with ISO 8573-1:2010 Class 1.4.2 110 PSI, 250 scfh99.99% pure Clean, dry, oil free110 PSI, 380 scfh99.5% pure Clean, dry, oil free110 PSI, 150 scfh
GAS TYPEHYDROGENARGONF5 (95% N2, 5% H2)
Gas Quality
Optimix Console Only*
99.995% pure 110 PSI, 150 scfh99.99% pure Clean, dry, oil free110 PSI, 105 scfh99.98% pure 110 PSI, 85 scfh
Equipped with HyperTherm CNC Control w/ HyperTherm ProNest Software
Comes with UAS Dust Collector System
Machine is Clean and in Excellent Working Condition. In Plant, Under Power.
