PINES CNC-075 CNC Tube Bender 3-Axis
Capacities:
Round tubing, mild steel Y.P. to 40,000 psi – 3” x .109
Round tubing, non-ferrous Y.P. to 25,000 psi – 3” x .187
Round tubing, stainless steel Y.P. to 60,000 psi – 3” x .065
Steel pipe, 2 IPS schedule 80
Square tubing, mild steel 2” x .125
Maximum standard radius 12”
Minimum radius to diameter ratio 1
Maximum bend angle 190º
Centerline height 2.0”
Bend arm repeatability +/- .1º
Carriage repeatability +/- .005”
Standard tube length over mandrel 12’
Average bend arm speed 14 RPM
B-axis travel: 360º Speed: 45 RPM
Y-axis travel: 6’ Speed: 2400 IPM
Working height 40”
Oil reservoir 55-gallon cap Sealed System
Motor horsepower 20 HP 480
Dimensions 16’ L x 5’ W x 5’ H
Weight 8,500 lbs.
Machine is equipped with Safety plates protecting both bend and return sides of swing arm, All electrical components in power panel are “finger-safe” and are in accordance with NFPA standards, Machine is labeled with pinch and hazard points, Programmable safety zone covering bend arm path
