← Back to Machine List

OKUMA MULTUS B300II – Year 2014

OKUMA MULTUS B300II – Year 2014
CNC Multi-Tasking Turning Center

MAXIMUM TURNING DIAMETER   24.80”
  DISTANCE BETWEEN SPINDLES   35.43”
  SPINDLE NOSE   A2-8
  CHUCK SIZE   10”, KITAGAWA B-210
  BAR CAPACITY   2.75”
  SPINDLE SPEEDS   45 – 3,800 RPMS
  HORSEPOWER   20 HP, INTREGRAL
  TOOL CHANGER CAPACITY   ATC 40 TOOLS, CAPTO C6 TOOLS
  RAPID TRAVERSE RATES   X & Z – 1,575,    Y – 1,023 IPM
  X-AXIS TRAVEL   22.83 (+22.04 ~ -.79 in)
  Z-AXIS TRAVEL   36.81”
  Y-AXIS TRAVEL   6.30 INCHES (+3.15” / -3.15”)
  C-AXIS TRAVEL   360 DEGREES, WITH DISK BRAKE
  B-AXIS TRAVEL   .001 DEGREE POSITIONING
  H1 SPINDLE TAPER   CAPTO C6
  H1 SPINDLE RANGE   50 – 10,000 RPMS
  H1 SPINDLE MOTOR   15/10 HP PREX MILLING MOTOR
  MAXIMUM TOOL LENGTH   11.81”
  MAXIMUM TOOL DIAMETER   3.54”/5.12” IF NO ADJACENT TOOL
  MAXIMUM TOOL WEIGHT   17.6 LBS.
  TOOL SETTER   AUTOMATIC, SERVO DRIVEN
  CNC CONTROL   OKUMA OSP-P300S
  HIGH PRESSURE COOLANT   PREPPED FOR ONLY
  BARFEEDER INTERFACE   UNIVERSAL TYPE INCLUDED
  CHIP CONVEYOR   INCLUDED
  MACHINE DIMENSIONS, WEIGHT   171” X 88” X 102.4” H,   22,660 LBS

Only 595 Cutting Hours

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →
How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase Used Machines For Sale
13/01/2026 • 4 min read

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase

Below is a professional, detailed guide for engineers and buyers on how to evaluate a pre-owned, used, second-hand, surplus CNC-Takang…

Read Guest Post →