Okuma MacTurn 550 – Year 2004
CNC MultiTasking Machine
| CNC Control | yes |
| Type of CNC Control | OSP-E100L |
| Chuck Size | 15 inches |
| Swing | 28.35 inches |
| Turning Diameter | 28.35 inches |
| Center Distance | 126.67 inches |
| Bar Capacity | 4.5 inches |
| X Axis Travel | 25.98 inches |
| X2 Travel | 9.06 inches |
| Z Axis Travel | 126.57 inches |
| Z2 Travel | 122.05 inches |
| Y-Axis Travel | 9.84″ |
| C1/C2 Axis Index | 0.001° |
| B Axis Head Tilt | 210° Degrees |
| Y Axis | yes |
| Spindle Nose | A2-11 |
| Spindle Speed | 3,000 rpm |
| Main Motor | 40 hp |
| Live Tooling | yes |
| Live Tooling Spindle Taper | HSK 100 |
| Live Tooling Speed | 10,000 rpm – Milling Spindle |
| Live Tooling Motor | 30 hp – Milling Spindle |
| Tailstock (Yes/No) | yes |
| Turret Capacity | 12 |
| ATC Capacity | 120 Stations for Milling Spindle |
| Weight | 61000 pounds |
– OSP-E100L CNC Control
– Auto Tow Along Tail Stock
– 10,000 Rpm H1 Spindle
– 0.001° Degree B Axis (Positioning)
– Tool Offset Function 200 Sets
– Prep for Lower Turret Steady Rest
– SMW Slu-5 Hydraulic Steady Rest
– Slide Hold During Threading
– Lower “M” Turret
– Absolute Scale Xa, Za & Ys
– 0.0001 Micron Control
– Side Exit Conveyor
– Dnc-dt500
– Gauging Data Printout
– Auto Gauging
– Y Axis Gauging Function
– Harmonic Spindle Speed Control
– No Load Monitor
– One Touch IGF-XL for Macturn
– Rapid Traverse Override Switch
– Programmable Tailstock
– Programmable Tailstock
– Tailstock Adv/Ret During Spindle Rotation
– Tailstock Thrust Hi/Low
– Prepped for 1000psi TSC for H1 Turret
– Robot Interface Type D
– Thermal Compensation Displacement (Tas-c)
– Chip Blaster Ev2000
– HI G Control
– HI G Control
