Okuma LB 300 MC – Year 2005
CNC Turning Center
| Turning length | 1020 mm |
| Turning Ø | 340 mm |
| Ø above the bed | 530 mm |
| Ø above transversing slide | 420 mm |
| Length between centers | 1020 mm |
| Type of CNC | OKUMA OSP E 100 L |
| X-axis | 260 mm |
| Z-axis | 1020 mm |
| Max workpiece weight | 250 kg |
| Spindle taper | ASA 8 – VTBI 40 |
| Spindle bore | 80 mm |
| Number of turrets | 1 |
| Number of tools on turret | 12 |
| Number of rotating tools | 12 |
| Turning speed | 4500 rpm |
| Spindle motor power | 7 kW |
| Tailstock | no |
| Bar feeder | no |
| Okuma LB 300 MC | CNC Turning Center |
| Length x width x height | 4160.0 × 1895.0 × 1925.0 |
| Weight | 6000 kg |
| Worked hours | 10369 hours |
| Hours under power | 28875 hours |
| State | good |
OKUMA LB 300 MC Lathe was manufactured in the year 2005 in Japan and has 28875 production hours, of which 10369 are spindle hours. It is equipped with an Okuma OSP E 100 L control unit.
The machine has a spindle speed of 3800 rpm.
Machine width: 4160 mm
Machine depth: 1895 mm
Machine height: 1925 mm
Machine weight: 6000 kg
CNC: OKUMA OSP E 100 L
Spindle speed range: 3800 rpm
Spindle motor power: 2 kW
Tool taper: ASA 8
X-Axis Movement: 260 mm
Z-Axis Movement: 1020 mm
Main electronic connection: 400 V
Chip conveyor: Yes
Turning diameter: 340 mm, max. Turning length: 1020 mm
Turret type 12 pos. Vtbi 40
Rot. Diam. On bench mm. 530, rot. Diam. On slide mm. 420
Spindle hole: 80 mm,spindle speed ranges 2 elect.
Speed feed mm/1′ from 45 to: 4500, speed progress rapid mm/1′ 25,000
C axis 360,000 positions
12 motorized positions with 45/4500 rpm with 7 kw; tool setting
Self-centering spindle diameter 250 mm. Autoblok, – n. 2 p/driven tools radial + n. 2 axial – predisposed for robots
2 automatic doors, spindle air blow
