Okuma LB 15 II – Year 1995
| Turning length | 1000 mm |
|---|---|
| Turning Ø | 350 mm |
| Ø above the bed | 530 mm |
| Type of CNC | OSP 7000 L |
| X-axis | 520 mm |
| Z-axis | 260 mm |
| Spindle taper | ASA 6 |
| Spindle bore | 62 mm |
| Number of tools on turret | 12 |
| Turning speed | 4500 rpm |
| Tailstock | no |
| Bar feeder | no |
| Length x width x height | 1895.0 × 3300.0 × 1900.0 |
| Weight | 5900 kg |
Features:
Numerical control OSP 7000 L
Turning diameter (mm) 350
Rot. Diameter on bench (mm) 530/340
Turnable length (mm) 1000
Spindle hole (mm) 62
Spindle connection type ASA 6
Spindle speed min (rpm) 45
Max spindle speed (rpm) 4500
Forward speed min (mm / min) 0.0001
Forward speed max (mm / min) 1000
Vel. advance rapid (mm / min) 20,000
Longitudinal travel (mm) 520
Cross travel (mm) 260
Tailstock quill stroke (mm) 120
Turret type 12 STATIONS
Spindle motor power 15 HP
Voltage (Volt) 380
Year of construction 1994
Weight (Kg) 5900
Height (mm) 1900
Width (mm) 3300
Depth (mm) 1895
2 electronic spindle speed ranges
