← Back to Machine List

Okuma Impact LU35 – Year 2006

  • Brand:Okuma
  • Model:Impact LU35
  • Year:2006
  • Maximum Swing:21.13″
  • Swing Over Saddle:18.90″
  • Max Turning Diameter:21.65″
  • Distance Between Centers:36.22″
  • Spindle Face:A2-8
  • Spindle Bore:3.5″
  • Spindle Speed:14 – 3200 RPM
  • Spindle Motor:30 HP
  • Number of Tools (Upper / Lower):12 / 10
  • X-Axis Travel (Upper / Lower Turret):14.96″ / 9.85″
  • Z-Axis Travel (Upper / Lower Turret):36.22″ / 34.45″
  • Rapid Rates:787 IPM
  • Tailstock Quill:MT #5
  • Electrical Requirements:220/480/3P
Equipped With
OSP-100 CNC Control, Twin Turret, Tailstock, 15″ Kitagawa B18 Chuck 3 Jaw Hydraulic Chuck, Chip Conveyor (Right side Discharge), Inch / Metric Switchable, Multi Color Tower Light, Box Way Construction, Slant Bed Design, NC Torque Limiter, Servo Driven Turret

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →
How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase Used Machines For Sale
13/01/2026 • 4 min read

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase

Below is a professional, detailed guide for engineers and buyers on how to evaluate a pre-owned, used, second-hand, surplus CNC-Takang…

Read Guest Post →