OKUMA IMPACT LU-15M – Year 1997
CNC Turning Center 5-AXIS TWIN-TURRET
| Manufacturer | OKUMA |
| Model | LU-15M |
| Year | 1997 |
| Condition | Used |
| OKUMA IMPACT LU-15M | CNC Turning Center |
| CNC Lathe | 5-AXIS TWIN-TURRET |
| Swing over bed | 20.87″ |
| Swing over carriage | 14.96″ |
| Swing over cross slide | 12.99″ |
| Maximum turning length | 23.62″ |
| X-axis travel (upper/lower) | 10.24″/5.51″ |
| Z-axis travel (upper/lower) | 25.20″/24.21″ |
| Headstock & main spdl nose | JIS-A2-8 |
| Spindle bore diameter | 3.15″ |
| Spindle speed range | TO 4500 RPM |
| X-axis rapid traverse speed | 590 IPM |
| Z-axis rapid traverse speed | 787 IPM |
| Motor, horsepower | 29.5 HP |
| Floor space req. | 156″ X 83″ X 76″ |
| Weight approximately | 12000 LBS |
Model : LU-15M OKUMA “IMPACT” 5-AXIS TWIN-TURRET CNC TURNING CENTER W/LIVE MILLING NEW 1997,
EQUIPPED WITH:
8″ 3-JAW CHUCK OKUMA OSP7000L CNC CONTROL LIVE MILLING CAPABILITIES 12 POSITION UPPER & 8 POSITION LOWER TURRET (DOES NOT HAVE THE CHIP CONVEYOR) – COOLANT TANK Tailstock
