← Back to Machine List

OKUMA GI-10NII CNC High Speed I.D. Internal Diameter Grinder – Year 2018

OKUMA GI-10NII CNC High Speed I.D. Internal Diameter Grinder – Year 2018

GRINDABLE BORE:
– Diameter 0.118″ – 5.91″
– Length – Maximum 5.91″
Work Spindle Bore 2.76″

SWING:
– Over Table 15.75″
– Within Chuck Cover 13.75″
Spindle Speed 50,000 RPM
Electrics 220-480V/3Ph/60Hz

EQUIPPED WITH THE FOLLOWING:
Okuma P300GA Controls
HK507 50,000 RPM ID Spindle
Magnetic chuck/ face plate
Rotary Dresser
Dresser Base Repositioner
pendant hand wheel adjustment
Paper Bed Coolant Filtration System
air Nozzel and system
full enclosure

This machine can be inspected under power in our shop as it has been removed from sellers shop. the machine
is in excellent running condition. The machine has only 589 hours
of use and is equipped with HI-speed spindle . contact us today to
set up inspection!!

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase Used Machines For Sale
13/01/2026 • 4 min read

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase

Below is a professional, detailed guide for engineers and buyers on how to evaluate a pre-owned, used, second-hand, surplus CNC-Takang…

Read Guest Post →
From Inspection to Installation: What to Verify Before Buying a Pre-Owned, Used, Secondhand, Surplus Amada Miyachi Jupiter 68P0070 Laser Welding System made in Japan Used Machines For Sale
12/01/2026 • 4 min read

From Inspection to Installation: What to Verify Before Buying a Pre-Owned, Used, Secondhand, Surplus Amada Miyachi Jupiter 68P0070 Laser Welding System made in Japan

Below is a professional, clear, and purely textual English evaluation guide you can use before purchasing a pre-owned / used…

Read Guest Post →
From Factory Floor to Your Workshop: Evaluating a Pre-Owned, Used, Secondhand, Surplus CNC Machine Before Purchase GWEIKE TECH LF-4020GAR Profile and pipe laser cutting machine made in China Used Machines For Sale
11/01/2026 • 4 min read

From Factory Floor to Your Workshop: Evaluating a Pre-Owned, Used, Secondhand, Surplus CNC Machine Before Purchase GWEIKE TECH LF-4020GAR Profile and pipe laser cutting machine made in China

This includes technical details, inspection checkpoints, and what to verify before buying — focused on practical machine assessment and workshop…

Read Guest Post →