← Back to Machine List

Okuma Captain L370 CNC Lathe – Year 2010

Okuma Captain L370 CNC Lathe – Year 2010
Max Swing Over Bed 20.8″
Max Swing Over Saddle 16.53″
Max Turning Diameter 14.56″
Chuck Size 8″ 3-Jaw
Max Turning Length 19.68″
X-Axis (Cross Travel) 10.23″
Z-Axis (Longitudinal Travel) 20.47″
X-Axis Feed Rates 0.00004 – 39.37 IPM
X-Axis Rapid Traverse Rate 787 IPM
Z-Axis Feed Rates 0.00004 – 39.37 IPM
Z-Axis Rapid Traverse Rate 984 IPM
# Tool Turrets 1
Tool Turret Positions 12 Total
Spindle Nose A2-6
Spindle Bore 2.44″
Spindle Speed Range 45 – 4,500 RPM
Spindle Horsepower 20 HP
Tailstock Quill Travel 4.72″
Tailstock Quill Diameter 3.54″
Electrics 220/3/60
Approximate Machine Dimensions 86.61″ x 67.72″
Approximate Machine Weight 9,240 LBS
CONDITION: This Machine Appears to be in Very Good Condition

EQUIPPED WITH:
Okuma OSP-P200L CNC Control, 8″ Kitagawa B-208 3-Jaw Hydraulic Chuck, 4500 RPM Spindle, 2.33″ Through Hole, 12 Position Golden Sun CLT-200 ID/OD Tool Turret, Henning KMM-1304-03 Chip Conveyor.

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany Used Machines For Sale
16/01/2026 • 3 min read

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany

Below is a practical, step-by-step guide for evaluating a used / second-hand / surplus / pre-owned KAPP NILES KS 2003…

Read Guest Post →
Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →