NRT MIG/TIG Weld P1233 Fanuc Robotic Weld Cell – Year 2018
| Year | 2018 |
|---|---|
| Make | NRT |
| Model | MIG/TIG Weld P1233 |
| NRT MIG/TIG Weld P1233 | Fanuc Robotic Weld Cell |
| Max Speed | 4000 RPM |
|---|---|
| Continuous Stall Torque | 19.4 |
| Payload | 20 KG |
| Reach | 1,813 mm |
| Repeatability | +/- 0.08 mm |
| Robot | 6-Axes |
| Controller | R-30iA |
| Power Supply | 200-240 VAC, 50/60 Hz, 3-phase |
| Power Consumption | 3.1 kVa |
| Weight | 250 KG (Including Controller) |
| Mounting | Floor, Ceiling, Wall |
Table Width: 10 ft by 6 ft (3ft from center of rotation to back of machine)
Swing: 6 ft max.
Motor Specs:
Max Speed: 4000rpm
Continuous Stall Torque: 19.4
Volts: 460/3 Phase
Robot Specs: Axes: 6
Payload: 20 kg
Reach: 1813 mm
Repeatability: ±0.08 mm
Motion range: J1: ±170°, J2: +155° to -70°, J3: +255° to -130°, J4: ±190°, J5: ±140°, J6: ±360°
Maximum speed: J1: 160°/s, J2: 160°/s, J3: 160°/s, J4: 350°/s, J5: 350°/s, J6: 540°/s
Controller: R-30iA
Power supply: 200-240 VAC, 50/60 Hz, 3-phase
Power consumption: 3.1 kVA
Weight: 250 kg (including the controller)
Mounting: Floor, ceiling, wall
Welder Specifications:
Input voltage: 208/230/460V, 3-Phase, 60 Hz
Input current at rated output: 50/44/22A
Output range: 5-570A
Duty Cycle: 500A at 39V, 100% duty cycle; 570A at 43.2V, 60% duty cycle
Output Voltage Range: 5-56V
Wire Feed Speed Range: 0-700 inches per minute (IPM)
Maximum Spool Size: 60 lbs. (27 kg)
Dimensions (H x W x D): 31.6 in x 23.8 in x 41.1 in (802 mm x 605 mm x 1044 mm)
Weight: 250 lbs. (113 kg)
