NISSEI FNX280Ⅲ-100A HYBRID Injection Molding Machine – Year 2019
Machine is a Servo-Hydraulic Nissei FNX280III-100A with a 48.5 oz Injection Unit.
900 hours total run time since new.
Power requirements are 230/3/60, 100A
Bi-metal barrel and screw with 900 hours.
Original screw and barrel with few hours included.
Matsui MJ5-I-650U 230/3/60, 40A Dryer with integral dryer hopper and machine on-demand loader.
MC5-G1-88H 9kW 230/3/60, 45 Mold Temperature Controller.
Purchased new as a turn-key molding cell.
Conveyor not included in sale.
Buyer responsible for loading and shipping.
Machine is connected and can be seen running.
FNX280Ⅲ
| Item | Unit | 71A (std) | | | 100A | ||||
|---|---|---|---|---|---|---|---|---|
| Screw diameter | inch (mm) |
A 2.20 (56) |
B 2.48 (63) |
C 2.80 (71) |
| | A 2.48 (63) |
B 2.80 (71) |
C 3.15 (80) |
| Injection capacity | inch3 (cm3) (oz) |
33.8 (554) (18.6) |
42.8 (701) (23.5) |
54.4 (891) (29.9) |
| | 48.5 (795) (26.6) |
61.6 (1010) (33.8) |
78.1 (1280) (42.9) |
| Max. injection pressure | psi (MPa) (kgf/cm2) |
28440 (196) (2000) |
22470 (155) (1580) |
17710 (122) (1245) |
| | 29790 (205) (2095) |
23390 (161) (1645) |
18490 (127) (1300) |
| Clamping force | USton (kN) (tf) |
309 (2740) (280) |
||||||
| Clamping stroke | inch (mm) |
32.7 (830) |
||||||
| Min. mold thickness | inch (mm) |
12.6 (320) |
||||||
| Max. daylight opening | inch (mm) |
45.3 (1150) |
||||||
| Tie bar clearance (H×V) | inch (mm) |
26.0×26.0 (660×660) |
||||||
| Die plate dimensions (H×V) | inch (mm) |
37.6×37.6 (955×955) |
||||||
| Ejector stroke | inch (mm) |
5.1 (130) |
||||||
NISSEI FNX-III Series
HYBRID TYPE INJECTION MOLDING MACHINE
Clamping force: 81~455 ton (89~501 USton)
Hybrid (Mid-Size)
Horizontal
Straight Hydraulic Clamping
TACT® Ⅳ Controller
X-Pump System®
