Niles DP2S3
Heavy Duty Lathe 7.5 Meters
| Length between centers | 7500 mm |
| Ø above the bed | 1650 mm |
| Ø above transversing slide | 1200 mm |
| Diameter in the gap | 2500 mm |
| Faceplate diameter | 1600 mm |
| Spindle bore | 105 mm |
| Turning speed | 180 rpm |
| Spindle motor power | 45 kW |
| Overhauled | no |
Centre distance (mm) 7500
Max swing over bed (mm) 1650
Max swing over cross slide (mm) 1200
Max swing in gap (mm) 2500
Spindle bore (mm) 105
R.P.M. 3.55 – 180 (24x)
kW 45
Volts 380V
Cycles 50
4-jaw faceplate Ø 1.600 mm
Steady rest Ø 700 mm
