MORI SEIKI ZT-2500Y – Year 2000
CNC Turning Center
Brand: MORI SEIKI
Model: ZT-2500Y
Year: 2000
Swing: 27.56″
Machining Length: 51.18″
Bar Capacity: 2.87″
Max RPM: 4,000 RPM
Turning Dia: 15.35″
Tailstock: No
The machine is a ZT 2500Y Main and sub spindles,
turret 1 has X, Y and Z with milling and
turret 2 has X and Z with milling.
All alignments are good.
Parts catcher/work conveyor work fine.
Has chip conveyor that works. Both main and sub side tool presetters work.
And there are 8 spindle liners too Missing one coolant pump. Comes with an LNS barfeeder but it needs quite a bit of work- I have a list of parts that it needs.
Some of the covers a banged up a bit.
Has 3 jaw chucks on it and comes with a few sets of jaws.
Tool holders: Boring bar 6 Part off 1 Turning 7 Radial milling 3 Face milling 5 (two of them are brand new- these are $3600 each from Mori) Apache Junction, AZ
The dimensions are: Machine 31000 lbs
L 180 W 110 H 110
Conveyor/tank L 200 W 110 Barfeeder 80 x 65 Plus one or two pallets/crates of tooling and accessories- could probably put it all in the machine or coolant tank.
