Moore 450 CPZ CNC JIG Grinder
Moore 450 CPZ, jig grinder, including the following items and features.
STANDARD FEATURES:
FANUC model 0i-MD, 5 axis CNC control system w/10.4” “FLAT SCREEN” color LCD and graphics display w/zoom functions
10.5 “ CNC cross travel (Y axis)
17.5 “ CNC longitudinal travel (X axis)
3.5” CNC vertical travel (Z axis)
360 degrees CNC rotation of C axis (Automatic C axis Normalcy)
Rapid traverse rate 60 IPM
Contouring rate 15 IPM
Ultra precision ballscrews on the X & Y axes, with motors and encoders mounted directly on the ballscrews for high accuracy
Precision roller bearing way system with accordion way covers
Oil bath for ballscrews
Dressing attachment
FANUC Closed loop AC digital servo drive motors w/quick connectors
FANUC Closed loop AC digital servo drive system (25 amp peak)
Automatic lubrication systems with low level alarm for roller way system
PROGRAMMABLE, ballscrew driven, “Z” axis
PROGRAMMABLE main spindle speeds CW/CCW/OFF (PLANETARY)
PROGRAMMABLE chop grind ON/OFF with head up micro switch
PROGRAMMABLE air grinding spindle ON/OFF
PROGRAMMABLE 110 V AC outlets ON/OFF
PROGRAMMABLE U axis outfeed
Manual pulse generator (handwheel) for easy set up
X, Y, U, C & Z home switches with indicator lights
X, Y, U, C & Z limit switches
X, Y, U, C & Z limit switch indicator lights
Minimum programmable resolution .000010”
Pendant type control cabinet
Three (3) coats of high gloss epoxy paint
Complete mechanical rebuild, including the following;
New Main spindle bearings
New outfeed bearings
New u-cups, packings, wiper, seals and o-rings
New head thermometer
New micro switches
New link and link pins
Re-grind quill keyway, and “FIT” slide and sleeve
Scraping of the column, table and saddle for geometry correction
Spotting of the table surface
Lapping of the table and saddle ways for proper roller bearing contact
SYSTEM ACCURACIES
Positioning Accuracy .000080”
Contouring Accuracy .000120”
All accuracies are guaranteed when operated under the standard operating procedures that are known to be standard for operating conditions within the industry, and all statements concerning accuracies are based on calibration temperature of
68 + degree F.
Contact to Mr.George
