MIYANO BNE-51S – Year 1998
Numerical Control: FANUC Series 18-T;
Capacity
Maximum turning length from bar: 90 mm;
Maximum turning diameter from bar (spindle): Ø 51 mm;
Maximum turning diameter from bar (counter spindle): Ø 41 mm;
Main Spindle
Chuck holder for collet chucks max. diameter: 177E DIN;
Chuck tube internal diameter: Ø 52 mm;
Chuck nose: ASA A2-6;
Spindle rotation speed: 4000 rpm
Spindle mechanical indexing: 5 degrees;
Minimum angle controlled with C axis: 0.001 degrees;
Counter spindle
Counter spindle gripper holder for maximum gripper diameter: 173E DIN;
Counter spindle nose diameter: Ø 110 mm;
Counter spindle rotation speed: 4000 rpm;
Spindle mechanical indexing: 5 degrees;
Minimum controlled angle with C axis: 0.001 degrees;
Axes
Bench/Tank inclination angle: 45° degrees;
X1 axis travel (upper turret): 150 mm;
Z1 axis travel (upper turret): 380 mm;
X2 axis travel (lower turret): 115 mm;
Z2 axis travel (lower turret): 125 mm; Z2 axis travel (lower turret): 125 mm;
B-axis travel (counter spindle): 450 mm;
X1/Z1/Z2/B axis rapid speed: 12 m/min;
X2-axis rapid speed: 10 m/min;
Upper turret
Number of turret stations: No. 12;
Motorized stations: N° 6;
Indexing time (station – station): 0.3 sec;
External/internal tool dimensions: 20/25 mm;
Distance between opposite sides turret: 280 mm;
Maximum diameter with installed tools: Ø 510 mm;
Pliers capacity (for drills and cutters): 16 mm;
Pliers capacity (for taps): M12;
Lower turret
MIYANO BNE-51S – Year 1998
