| MIYANO BNA-42DHY CNC Turning Center with Miyano M-542 Edge Patriot 338 Magazine Bar Feed – Year 2011 |
|
|---|---|
| Condition | Used |
| Year | 2011 |
| Machine Control | Miyano / Fanuc Control |
| Capacity | |
| Maximum Machining Diameter | 41.9 mm (1.65″) |
| Standard Machining Length | 100 mm (3.94″) |
| Maximum Bar Capacity (Spindle 1 / Spindle 2) | 41.9 mm / 34 mm (1.65″ / 1.34″) |
| Axis Travels | |
| X-Axis Travel (X1 & X2) | 140 mm (5.52″) |
| Y-Axis Travel | ±35 mm (±1.379″) |
| Z-Axis Travel (Z1 / Z2) | 235 mm / 360 mm (9.26″ / 14.18″) |
| B-Axis Travel (Subspindle) | 310 mm (12.21″) |
| C-Axis Resolution (Both Spindles) | 0.001° |
| Spindle | |
| Maximum Spindle Speed (Main / Sub) | 6,000 RPM / 5,000 RPM |
| Spindle Motor (Main / Sub) | 7.5 kW / 5.5 kW (10 HP / 7.4 HP) |
| Live Tooling Speed | 5,000 RPM |
| Live Milling Motor | 2.8 kW (3.75 HP) |
| Turrets | |
| Front Turret Positions | 6 Positions |
| Rear Turret Positions | 8 Positions (All Live Tool Capable) |
| Rapid Traverse Rates (X1, Z1 / Y1, X2, Z2) | 20 m/min / 12 m/min (788 IPM / 473 IPM) |
| Machine Dimensions & Weight | |
| Machine Dimensions (L x W x H) | 2242 x 1473 x 1681 mm (88.25″ x 58″ x 66.2″) |
| Machine Weight | 2,993 kg (6,600 lbs) |
| Equipped With | |
| • Miyano M-542 (Edge Patriot 338) Magazine Bar Feed • Live Milling / Drilling Capability • Subspindle • Dual Front & Rear Turret Design • Full C-Axis on Both Spindles • Y-Axis Capability on Rear Turret • Hainbuch Collet Chuck (Main & Subspindle) • Automatic Parts Catcher • Parts Exit Conveyor • Chip Conveyor • Mist Collector • Rigid Tapping • Fixed Headstock Design • RS 232 Port Interface • Complete Coolant System with Tank & Pump • All Available Tooling (As Pictured) • All Available Manuals |
|
| Usage Data | |
| Power On Hours | 34,368 Hours |
| Cutting Hours | 7,544 Hours |
