| MITSUBISHI SC40 Gear shaping machine – Year 2018 | ||
|---|---|---|
| Specification | Value (Metric) | Value (Imperial) |
| Maximum Workpiece Diameter (External Gear) | 400 mm | 15.75 in |
| Maximum Workpiece Diameter (Internal Gear) | Cutter PCD + 250 mm (Max Ø400 mm) | Cutter PCD + 9.84 in (Max Ø15.75 in) |
| Maximum Cutting Module | Module 8 | Module 8 |
| Maximum Gear Face Width | 115 mm | 4.53 in |
| Maximum Stroke Width | 135 mm | 5.31 in |
| Cutter Stroke Rate | 50 – 800 strokes/min (Stepless) | 50 – 800 strokes/min (Stepless) |
| Stroke Rate Change Method | Controlled by S-Code | |
| Circumferential Feed | 2.5 – 5000 deg/min | 2.5 – 5000 deg/min |
| Radial Feed | 0.1 – 5000 mm/min | 0.004 – 197 in/min |
| Cutter Spindle Diameter | 100 mm | 3.94 in |
| Table Diameter | 520 mm | 20.47 in |
| Main Motor | 7.5 kW (AC Spindle Motor) | 10 HP |
| High Output Type (Optional) | FANUC 15P – 5 Axis Control (Stroke Width, Saddle Up/Down – Cutter, Table, Radial) | |
| NC Control | FANUC 32i | |
| Machine Weight | 8,000 kg | 17,637 lbs |
| Total Power Requirement | 38 kVA | 38 kVA |
| AKZ Series Oil Cooling Unit – Technical Specifications | |||||
|---|---|---|---|---|---|
| Specification | 0.5 HP | 1.2 HP | 1.5 HP | 2.0 HP | 3.0 HP |
| Model | AKZ 146 (-B, -C) | AKZ 328 (-B, -C) | AKZ 438 (-B, -C) | AKZ 568 (-B, -C) | AKZ 908 (-B, -C) |
| Cooling Capacity (50/60Hz) | 1.3 / 1.5 kW | 2.8 / 3.2 kW | 3.8 / 4.3 kW | 5.0 / 5.6 kW | 8.0 / 9.0 kW |
| Power Supply | AC 3 Phase 200/220V – 50/60Hz | ||||
| Control Voltage | DC 12V / 24V | ||||
| External Dimensions (W × D × H) | 650 × 360 × 440 mm | 720 × 360 × 440 mm | 990 × 360 × 440 mm | 1110 × 470 × 560 mm | 1220 × 560 × 560 mm |
| Heat Exchanger Type | Shell & Coil Type | ||||
| Compressor Type | Hermetic Type | ||||
| Fan Type | Propeller Fan | ||||
| Oil Pump Motor | 0.4 kW × 4P | 0.4 kW × 4P | 0.4 kW × 4P | 0.75 kW × 4P | 0.75 kW × 4P |
| Fan Motor | 75 W | 90 W × 4P | 90 W × 4P | 150 W × 4P | 150 W × 4P |
| Oil Pump Discharge Rate (50/60Hz) | 12 / 14 L/min | 24 / 28.8 L/min | 24 / 28.8 L/min | 30 / 36 L/min | 30 / 36 L/min |
| Oil Pump Discharge Pressure | 0.5 MPa | ||||
| Temperature Control Range | 5 – 50 °C | ||||
| Refrigerant | R410A | ||||
| Ambient Temperature Range | 5 – 45 °C | ||||
| Oil Viscosity Range | 1.4 – 200 mm²/s (ISO VG2 – 32) | ||||
| Maximum Operating Pressure (Discharge) | 0.5 MPa or less | ||||
| Maximum Operating Pressure (Suction) | –30.7 kPa or less | ||||
| Connection Port (Inlet / Outlet) | Rc 3/4 | Rc 1-3/4 | |||
| Noise Level | 52 dB(A) | 58 dB(A) | 65 dB(A) | 65 dB(A) | 67 dB(A) |
| Weight | 52 kg | 58 kg | 67 kg | 97 kg | 125 kg |
| Operating Oil Tank Capacity | 10 L | 10 L | 10 L | 15 L | 20 L |
