Mitsubishi FA10S – Year 2005
EDM Wire
| Year | 2005 |
|---|---|
| Make | Mitsubishi |
| Model | FA10S |
| Mitsubishi FA10S | EDM Wire |
| X-Axis Travel | 13.7″ |
|---|---|
| Y-Axis Travel | 9.8″ |
| Z-Axis Travel | 8.6″ |
| Control | 64-Bit Industrial PC CNC |
| U/V Axis Travel | 1.25″/1.25″ |
| Degree Taper Cutting | 15 @ 4″ |
| Inside Tank Dimensions | 31.4″ x 23.6″ |
| Power Requirement | 200-230/3/60 |
| Wire Diameter | .012″ |
| Submerged Cutting | Up to 8.6″ |
| Filter Tank Capacity | 116 Gallons |
| Table Dimensions | 23.2″ x 20.2″ |
| Max Workpiece Dimensions | 31.4″ x 23.6″ x 8.4″ |
| Machine Dimensions | 62″ x 65.6″ x 75.9″ |
| Machine Weight | 6,000 Lbs |
FEATURES
| 16 Step Programmable Flushing Control | Auto Oiler |
| Auto Power Recovery | Auto Wire Threading |
| Chiller | Direct Drive 25mm Ball Screws |
| Fast Fill Pump | Glass Scale Feedback |
| Rotary Glass Encoders | 2 Millionths Resolution Encoder |
| Servo Closed Loop Torque Control With Wire Tensioning System | 22 Lb Wire Spool |
| 4 Sided Table One Piece | Wire Chopper |
| Submerged Threading & Insert At Break Point | Upper & Lower Power Feeds |
| Vertical Movement Machining Tank Door | Automatic Level Control |
| Digital AC Servo Drive System | Fine Hole Insert |
| Fine Surface Machining | Linear Motion Guide Ways Support X/Y/Z Axes |
