← Back to Machine List

Milltronics VM25 – Year 2012

Milltronics VM25 – Year 2012

Machining Center
Control:CNC
Power source:Electric
Date:2012
Spindle speed:8,000 RPM
Automatic tool changer:ATC Type Double Arm Number of tools 24
Max. tool length 9″ (230 mm) max. tool weight 15 lbs. (7 kg) motion:X, Y, Z axis rapid traverse rate 1000 IPM (25.4 m/min)
General:Machine Height 120″ (3050 mm)

This was recently removed from an aerospace company that closed.
This is a nice 60″ travel machine. It will not last long at this price.
CAPACITY:
X axis travel 60″ (1540 mm) *UPGRADED from 50″ standard
Y axis travel 25″ (635 mm)
Z axis travel 24″ (610 mm)
Table size 56″ x 24″ (1420 mm x 610 mm) *NEED TO VERIFY
Allowable table load 3500 lbs. (1580 kg)
T-Slot size .63″ (16 mm)
Add-ons and Upgrades:
Wired 4th Axis Ready
10″ Troyke DL-10-B Rotary Table & Tailstock
Coolant Through Spindle
60″ X-Axis
10mm Pitch Ballscrew on X
Linear Ball Ways on X
Upgrade Spindle Cartridge from 60mm to 70mm
Convenience Package
Air Blast
Chip Washdown
Networking Option
Offline Software *Need to Verify
6- Nozzle Flood Coolant
Remote Hand Wheel
Performance Package
Edit Lockout
Upgraded Spindle Motor
Chip Auger

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

What are Top 50 CNC Machined Parts in Aerospace sector? Paid Guest Post
16/01/2026 • 11 min read

What are Top 50 CNC Machined Parts in Aerospace sector?

Top 50 CNC Machined Parts in Aerospace: The Role of CNC Machine Tools in High-Precision Aerospace Manufacturing The aerospace industry…

Read Guest Post →
Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany Used Machines For Sale
16/01/2026 • 3 min read

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany

Below is a practical, step-by-step guide for evaluating a used / second-hand / surplus / pre-owned KAPP NILES KS 2003…

Read Guest Post →
Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →