MAZAK VCN-510C/50-II CNC Vertical Machining Center with Tooling – Year 2007
| Specification | Metric | Imperial |
|---|---|---|
| X-Axis Travel | 1,041 mm | 41 in |
| Y-Axis Travel | 508 mm | 20 in |
| Z-Axis Travel | 508 mm | 20 in |
| Rapid Traverse Rate (X, Y, Z) | 36,000 mm/min | 1,417 IPM |
| Cutting Feed Rate (Approx.) | 20,000 mm/min | 787 IPM |
| Table Size | 1,300 mm × 550 mm | 51.18 in × 21.65 in |
| Table Load Capacity | 1,197 kg | 2,640 lbs |
| Spindle Taper | CAT 50 | |
| Spindle Speed | 6,000 RPM | 6,000 RPM |
| Spindle Motor Power | 18.6 kW | 25 HP |
| Tool Changer Capacity | 24 Positions (Side-Mount ATC) | |
| Tool Change Time (Chip-to-Chip) | 1.3 – 2.9 sec | 1.3 – 2.9 sec |
| Max Tool Diameter | 125 mm | 4.9 in |
| Max Tool Length | 350 mm | 13.8 in |
| Max Tool Weight | 7.7 kg | 17 lbs |
| Spindle Nose to Table Top | 150 mm – 660 mm | 5.9 in – 25.98 in |
| Air Requirement | 5.5 bar, 113 L/min | 80 PSI, 4 SCFM |
| Power Requirement | 220 V, ~35 kVA, 3-Phase | 220 V, ~35 kVA, 3-Phase |
Equipped With
- Mazatrol Matrix CNC Control
- Through Spindle Coolant (TSC)
- Through Spindle Air Blast
- Rigid Tapping
- Miscellaneous CAT50 Tool Holders
