← Back to Machine List

Mazak M-5N CNC Big Bore Lathe – Year 2008

Mazak M-5N CNC Big Bore Lathe – Year 2008
Manufacturer Mazak
Model M5N/2000 7.1″ Big Bore
Year 2008
Condition Used
Control Mazatrol Fusion 640T
Chuck Size 20″ Manual 4 Jaw Chuck
Maximum Swing over Bed 24.02″
Maximum Swing Over Cross Slide 12.99″
Maximum Distance Between Centers 81.89″
X-Axis Travel 22.05″
Z-Axis Travel 80.91″
Spindle Nose / Spindle Bore A2-15″ / 7.13″
Spindle Speed 5 – 1,000 RPM
Spindle Motor 30 HP
Number of Turrets 2 Turrets
Number of Turret Positions 8 Position Turning / 6 Station Boring
Rapid Traverse Rates X/Z 472 IPM / 551 IPM
Tailstock Quill Travel / Center 5.12″ / MT #5
Machine Dimensions 221″ x 119″ x 89″
Machine Weight 14,800 lbs.
7.1″ Big Bore Option

20″ 4 Jaw Manual Chuck on Front

20″ 4 Jaw Manual Scroll Chuck on Rear

Chip Conveyor
Tailstock
Coolant System with Tank & Pump
Color Monitor
RS-232C Port for DNC Interface
3.5″ Floppy Disk Drive Interface
PCMCI Interface 2 Slots
IC Memory Card Interface
Backround Tool Path Check
Multi-Tap Transformer
All Available Manuals

All Available Tooling

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany Used Machines For Sale
16/01/2026 • 3 min read

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany

Below is a practical, step-by-step guide for evaluating a used / second-hand / surplus / pre-owned KAPP NILES KS 2003…

Read Guest Post →
Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →