MAZAK INTEGREX I-200 S – Year 2015
CNC Multitasking Turn-Mill Center

Swing Over Bed: 25.9″
Turning Diameter: 16.53″
Turning Length: 39.8″
Distance Between Spindles: 41.77″
Chuck Size 1, 2: 8″ , 8″
Spindle Nose 1, 2: A2-6 , A2-6
Spindle Bore Diameter 1, 2: 3″ , 2.99″
Bar Capacity 1, 2: 2.56″ , 2.5″
Spindle Speeds 1, 2: 5000 RPM , 5000 RPM
Spindle Power 1, 2: 30 hp , 30 hp
B-Axis Head Indexing: +- 120°
B-Axis Milling Spindle Speed: 12,000 RPM
B-Axis Milling Spindle Taper: CAPTO C6
B-Axis Milling Spindle Power: 30 hp
ATC for Milling Spindle: 72 ATC
Tool Diameter: 3.54″ , 4.92″
Tool Length: 11.8″
Tool Weight: 22 lbs
X-Axis Travel X1, X2, X3: 24.21″
Z-Axis Travel Z1, Z2, Z3: 62.4″
Y-Axis Travel Y1, Y2, Y3: 9.84″
C-Axis Indexing 1, 2: .0001° , .0001°
W-Axis Travel Sub Spindle: 41.97″
Rapid Traverse Rates X1, X2, X3: 1969 IPM
Rapid Traverse Rates Z1, Z2, Z3: 1969 IPM
Rapid Traverse Rates Y1, Y2, Y3: 1575 IPM
Rapid Traverse Rates W – Axis: 1181 IPM
Equipped With:
Mazatrol Matrix II CNC Conversational Control
Auto Chuck Jaws Open & Close Main & Sub
Auto Door Open & Close
Auto TLM
Automatic Tool Presetter
Chuck Air Blow for Sub Spindle
Comparison Stop
Concept 2000 Chip Removal System
Cylinder
EIA, Spiral, EIA 3D Comp.
EXT-Data I/O, Shape Comp.
Fanuc M-20 iA 6-Axis Robot, 44 lbs. Payload, 46.4″ Reach
Fanuc System R-30 iB Robot Controller with Pendant
G00 Slope Constant
G54.1
Inch/mm Conversion
Polar Coordinates Input
Rotation, Geometric, Scaling
ROT-Axis Shape Comp.
Sync. Mill Tap
Thru Hole Draw Tubes on Main & Sub Spindles
Variable 600 Sets