← Back to Machine List

Lasco HO-U 500 So Hydraulic Die Forging Hammer 500 Ton – Year 2008

Lasco HO-U 500 So Hydraulic Die Forging Hammer 500 Ton – Year 2008

Hammer Lasco
Machine Type HO-U 500 So
Commission No. 100.07404
Delivery Date KW05/09
Blow Energy approx. 63 kJ
Blow Frequency at Rated Power approx. 85 strokes/min
Ram Stroke (max.) 770 mm
Ram Stroke (min.) 520 mm
Ram Weight approx. 4,300 kg
Ram Depth approx. 735 mm
Die Height (without flash) max. 580 mm / min. 330 mm
Frame Weight approx. 88,000 kg
Total Hammer Weight approx. 113,000 kg
Height Above Floor (floor to top of insert = 700 mm) 5,250 mm
Total Height approx. 6,635 mm
Oil Volume in Tank approx. 1800 l
Accumulator Pressure approx. 130 bar
Hydraulic Plan No. HO500-22-3409248-0
Electrical Circuit Diagram No. see Register “F”

Technical Data (Electrical)

Main Motor Power 2 × 75 kW
Lubrication Pump Power 0.18 kW
Operating Voltage 400 V / 50 Hz
Control Voltage 230 V / 50 Hz
Valve Voltage 24 V DC
Motor Protection Class IP 55
Control Column Protection Class IP 55
Display Colour
Screen Diagonal 10.4″

Technical Data HO-U Series

HO-U SERIES 160 200 250 315 400 500 630 800 1000 1250 1600 2000
Blow energy (with installed upper die with nominal weight) [kJ] 16 20 25 31.5 40 50 63 80 100 125 160 200
Nominal weight of upper die [kg] 100 150 200 250 400 550 600 700 800 1200 1800 2500
Blow frequency at nominal capacity approx. [1/min] 95 95 92 90 90 90 85 80 78 70 68 63
Ram velocity [m/s] 5 5 5 5 5 5 5 5 5 5 5 5
Ram depth [mm] 460 500 570 590 590 690 760 800 900 1000 1100 1200
Ram weight [kg] 1250 1500 1900 2300 2700 3200 4300 5600 7100 8500 11000 13500
Ram stroke max. [mm] 640 660 690 700 710 730 760 810 850 930 960 980
Ram stroke min. (to reach max. blow energy, distance billet to upper die) [mm] 480 480 480 500 500 500 520 560 600 680 710 730
Max. die height with dovetails (incl. billet) [mm] 320 360 390 400 430 450 460 530 550 750 830 910
Min. die height without dovetails [mm] 180 180 200 220 220 220 280 300 500 580 660 –
Daylight between guides [mm] 580 580 650 700 700 700 800 850 850 1000 1100 1150
Width of frame base [mm] 2290 2290 2800 2800 2800 2800 3000 3100 3390 3600 3600 4400
Depth of frame base [mm] 1250 1400 1400 1400 1400 1400 2000 2000 2450 2450 2450 2450
Frame weight [t] 24 25.5 38 41.5 48 58 81 101 130 140 156 180
Width of base plate [mm] – – – – – – – – 4100 4100 4950 –
Depth of base plate [mm] – – – – – – – – 3100 3100 3150 –
Weight of base plate [t] – – – – – – – – 32 45 48 –
Total weight approx. [t] 32.5 36 51 55.5 68 80 105 133 165 215 247 326
Total mass to be absorbed approx. [t] 33 37.5 52.5 57 70.5 83 108 137.5 169.5 221 254 339
Moving mass approx. [t] 1650 2150 2650 2900 3150 3800 4950 6400 8000 9850 13000 16000
Height above floor (insert height 700 mm) approx. [mm] 4310 4380 4910 4975 4905 5080 5110 5850 6100 6590 6720 7150
Total height approx. [mm] 5000 5100 5850 6100 6500 6550 6600 7300 7950 8850 9300 10100
Main motor capacity (400V/50Hz) [kW] 37 45 55 55 2×45 2×55 2×75 2×90 2×132 2×132 2×160 –
Cooling motor capacity [kW] 2 3 3 3 4 4 5.5 5.5 5.5 5.5 5.5 2×4
Cooling capacity [kW] 41 80 80 80 116 116 116 160 160 160 2×116 2×116
Lubricating pump capacity [kW] 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18
Total connected load approx. [kVA] 55 65 80 80 120 150 195 235 235 330 335 400

* All data are suggested values and can be adapted to customer’s requirements.

 

Manufacturer:
Lasco
Model:
HO-U 500 So
Machine number:
63 kj 2008
Year of construction:
2008
Condition:
ready for operation (used)
Functionality:
fully functional

63kj 2008 It works perfectly fine.

What is Hydraulic Die Forging Hammer?

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Smart Buyer’s Guide: How to Choose the Right Pre-Owned, Used, Secondhand, Surplus CNC Equipment Before Purchasing Pratt & Whitney Model B Keyway Cutter Vertical Shaper made in USA? Used Machines For Sale
22/02/2026 • 4 min read

Smart Buyer’s Guide: How to Choose the Right Pre-Owned, Used, Secondhand, Surplus CNC Equipment Before Purchasing Pratt & Whitney Model B Keyway Cutter Vertical Shaper made in USA?

Here’s a smart buyer’s guide tailored specifically for pre-owned, used, secondhand, surplus CNC equipment, with real technical considerations and criteria…

Read Guest Post →
Performance Matters: How to Choose a Reliable Pre-Owned, Used, Surplus, Secondhand Reishauer RZ 150 CNC Gear Grinding Machine made in Germany without Regret Used Machines For Sale
20/02/2026 • 3 min read

Performance Matters: How to Choose a Reliable Pre-Owned, Used, Surplus, Secondhand Reishauer RZ 150 CNC Gear Grinding Machine made in Germany without Regret

A gear grinding machine like the Reishauer RZ-150 represents significant investment. Whether you’re purchasing for production capacity, surface finish quality,…

Read Guest Post →
Maximize ROI: Professional Tips for Purchasing a Pre-Owned, Used, Secondhand, Pre-Owned KIWA KNH-426X CNC Horizontal Machining Center made in Japan Used Machines For Sale
19/02/2026 • 3 min read

Maximize ROI: Professional Tips for Purchasing a Pre-Owned, Used, Secondhand, Pre-Owned KIWA KNH-426X CNC Horizontal Machining Center made in Japan

When investing in a used KIWA KNH-426X, the objective is not simply to secure a lower purchase price — it…

Read Guest Post →