KLINGELNBERG Oerlikon S35 – Year 1993
CNC 10 Axis Spiral Bevel and Hypoid Gear Cutting Machine
FEATURES:
10-Axis CNC Control
Suited For Medium & Large Spiral Bevel & Hypoid Gears
23.6″ Maximum Workpiece Diameter
Designed High Dependability & Precision
Continuous & Single Indexing Operations
SPECIFICATIONS:
Maximum Workpiece Diameter ……………… 23.6″
Smallest Normal Module ………………………. 0.137″
Largest Normal Module ……………………….. 0.393″
Max Tooth Width ………………………………… 3.93″
Smallest Transmission Ratio ……………….. 1:1
Largest Transmission Ratio ………………… 1:10
Spiral Angle (Degrees) ………………………. 0-60
CUTTER HEAD SPINDLE:
Oerlikon Short Taper 1:4 ……………… 0-5.118″
Spindle Speeds (Inf. Var.) ……………. 30-350 min-1
Spindle Tilt (Degrees) …………………. 0-35
Eccentricity ……………………………….. 0-10.82″
Cutter Head Radius …………………… 3.46″-7.12″
WORKPIECE SPINDLE
Oerlikon Outside Taper 1:4 ………………….. 0-8.85″
Inside Taper No. 39, 1:19,692 ……………… 6″
Max Spindle Speed ……………………………. 0-160 min-1
Bore ………………………………………………… 0-6.29″
Axial Offset ………………………………………. +/-2.36″
Swivel Range (Degrees) ……………………. -7 up to 90
FEEDS:
Generating Feed (Inf. Var.) ……….. 40 Deg./Second
EQUIPPED WITH:
Schleicher (Siemens) 10-Axis CNC w/ RS-232
11″ Magnetic Chip Conveyor
Bosch Drives
Continuous & Single Indexing Methods
AC Motors & Controls
100 KVA Transformer
Chiller
Mist Collector
McLean Air Conditioner Unit
Klingelnberg Oerlikon S35 10 Axis Spiral Beval and Hypoid Gear Cutting Machine
Serial No. 380 New 1993
The Klingelnberg Oerlikon S-35 is especially suited for medium to large series production of spiral bevel and hypoid gears with working diameters up to 600mm for the automotive industry. All axis of the S-35 are CNC controlled. This machine was designed to have extremely high dependability and precision.
The S-3 operated with both the continuous and single indexing methods, thus enabling the user to produce gear sets using the most common Oerlikon and Gleason methods.
The S-35 will Face Hob with Klingelnberg/Oerlikon FS Cutter Bodies and Face Mill with Gleason Five Cut or Completing Index Methods. The Cutter Spindle Oerlikon Taper Adapter will come off to reveal the Gleason Cutter Taper Adapter inside the Oerlikon Nose.
