Jones & Shipman 1300X – Year 1998
UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER

14″ x 27″ JONES & SHIPMAN “HIGH PRECISION”

MICROPROCESSOR CONTROLLED

(MADE IN GREAT BRITIAN, NOW A DIVISION OF HARDINGE)

MODEL: 1300X S/N: M20307 MFG. 1998

Table:

Swing:…………………………. 14″

Distance Between Centers:………… 27″

Table Swivel:…………………… 16 Degrees CW

18 Deg. CCW

Feed Rate:……………………… Up to 196.8″

Minimum Programmable Increment …… 0.00005″

HPG Increments …….. 0.00005″, 0.0005″, or 0.005″

Wheelhead:

Total Infeed Travel:…………….. 9.6″

Max. Programmable Diametral

Infeed Rate, per Minute ………… 3.9″

Minimum Programmable Increment …… 0.00005″

HPG Increments …….. 0.00005″, 0.0005″, or 0.005″

Swivel Range …………………… 190 Degrees CW

45 Deg. CCW

External Grinding Wheels:

Grinding Wheel Size, L.H. Standard:.. 14″ x 2″W x 5″B

R.H Standard: .. 12″ x 1″W x 5″B

Spindle Speeds (3):………. 1775, 2068 & 2400 RPM

Motor Power: …………………… 5.5 H.P.

Headstock:

Swivel:………………………… 15 Degrees CW

90 Deg. CCW

Speed, Infinitely Variable:………. 30 to 450 RPM

Centers, Standard/Reduced ……….. #5 MT/#3 MT

Approximate Weight: …………….. 5,300 Lbs.

Approximate Dimensions: ………. .. 99″L x 55″D x 71″H

Equipped with:

“Microprocessor Control is from a unique, operator

compatible, touch key panel, that’s easy to use and,

because of faster set ups, enables a higher level of

grinding performance.”

“Grinding cycles are very easy to program, using step

by step parameter prompting with default values

which can be accepted or amended as required.

At the end of a cycle the wheel retracts automatically.

For manual operation, precise control of table traverse

and wheelfeed is by hand pulse generators (HPG’s) and

the position of each axis is clearly indicated on digital

readouts, which also display parameters.”

Automatic Dressing of the grinding wheel with automatic

wheel compensation.

Table and wheelhead driven by AC digital servo motors,

preloaded ballscrews& rotary encoders.

Low friction coated guideways on the table and wheelhead

axes.

AC variable speed headstock motor with #5 MT/#3 MT center

adapter.

Adjustable spring loaded tailstock with #3 Morse Taper center

“Darenth” external coolant pump and tank with paper band

filtration.

Three Wheelhead Design, L.H. Standard, R.H. Standard

and Swing Around Internal Grinding, complete

with internal grinding spindle.

Machine Operation and Maintenance manual

Machine is wired for 230 volt operation.

Inspect Under Power in our Warehouse
Excellent Machine, Condition & Appearance – Original