JD Squared RC-6 Rotary Plasma Tube & Pipe Cutter – Year 2021
Brand: JD2
Model: RC-6
Year: 2021
Specifications
Bed Length: 24′
Max Outside Diameter w/ Tube Stabalizer: 6″ Schedule 40, 4″ Square Tubing, 4″ Channel, 4″ Angle Iron
Max Outside Diameter w/o Tube Stabilizer: 8″ Schedule 40 Pipe at reduced length, 6″ Square Tubing, 5″ Channel, and 5″ Angle Iron
Max Cutting Dimensions for 24′ Machine: Y-axis 22.5′ , X- axis 12.5″ , Z-axis 7″
Equipped With
Windows based controller, Hypertherm Powermax Powersource, Tube Stabilizer
Manufacturer Catalogue ınformation about
JD Squared RC-6 Rotary Plasma Tube & Pipe Cutter Machine :
RC-6 Specifications Summary
| Available Length | Standard Length 12′ (Additional 12′ extension available for purchase)’ |
| Maximum Outside Diameter Size Capacity while using tube stabilizer | 6″ schedule 40 Pipe, 4″ Square Tubing, 4″ Channel, and 4″ Angle Iron |
| Maximum Outside Diameter Size Capacity not using tube stabilizer | 8″ schedule 40 Pipe at reduced length, 6″ Square Tubing, 5″ Channel, and 5″ Angle Iron |
| Max Cutting Dimensions for 12′ Machine | Y-axis 10.5′ , X- axis 12.5″ , Z-axis 7″ |
| Max Cutting Dimensions for 24′ Machine | Y-axis 22.5′ , X- axis 12.5″ , Z-axis 7″ |
| Motors | Brushless Servo Motors on all axis |
| Machine Power Requirements | 190-240VAC, 1PH with Neutral, 50/60Hz, 30A. Machine only. Optional automatic router control increases required amperage to 40A. |
| Plasma Compatibility | The RC-6 requires a machine controllable plasma power unit, which is basically a way to turn the torch on and off automatically. A Begin Traverse, also known as Arc Okay, signal is accepted but not required for operation. If you’re not sure if your existing plasma power supply is compatible, contact a sales representative and we’ll look into it. |
| Router Compatibility | The RC-6 requires a standard hand router. If the optional automatic router control is being used, the maximum allowable amperage for the router is 15A. |
