INNSE TP 160 DOUBLE HEAVY DUTY – Year 1980
Max. turning length with removed steady rests 31400 mm
Max. turning length for 2 parts simultaneous operated (as 2 apart lathers) 26200 mm
Centers height 1200 mm
Max. turning diameter over carriages 1600 mm
Max. diameter over bed cavers 2000 mm
Min. turning diameter with tool gets out 450 mm 0
Max. turning depth on max turning diameter 450 mm
Max. wight of work piece fixed between centers at max. speed 125000 Kg
Max. load of work piece fixed between 90°centers at max. speed of 10m/min 160000 Kg
Max. load of work piece fixed between 75°centers at max. speed of 10m/min 160000 Kg
Clamping axial left / right force s 100000 / 55000 daN
Centers angles 90°
Face plate left / right diameter 1750/1600 mm
Clamping force of a one left /right clamping jaw 35000 / 25000 daN
Main spindles diameters of left / right front bearings 530 / 400 mm
Face plate speed ranges 0.8-10-160 rpm
Power of main drive motors 200 HP
Transversal travels 800 mm
Longitudinal feeds ranges 0.2-6000 mm/min
Transversal feeds ranges 0.1-1500 mm/min
Torque of longitudinal feeds motors 6 daNm
Torque of transversal feeds motors 6 daNm
Quills diameters of left / right front bearings 400 / 180 mm
Quills travels 150 mm
Positioning feed of tail stock quills 36.3 mm/min
Rapid feed of tail stocks 2400 mm/min
Max. load on a steady rest 80000 Kg
Positioning feed 1000 mm/min
Range of steady rest bearing diameters with blocks 200-1200 mm
Range of steady rest bearing diameters with blocks 200-1200 mm
160 (AT 10RPM) DOUBLE LATHE TP 160/ LEFT – L103
160 TON CAPA
80 (AT 10RPM) DOUBLE LATHE TP 160/ RIGHT- L104
80 TON CAPA
UPGRADE IN 2004
