Goodway GS-260MYS CNC Turning Center – Year 2006
Manufacturer Goodway
Model GS-260MYS CNC Lathe
Year 2006
Condition Used
Serial Number 918106
Year 2006
Control Fanuc Series 18i-TB
Condition Very Good
Chuck Size 10″(250mm)
Bar Capacity 65mm
Spindle Nose A2-8
Max Swing 650mm
Swing over Saddle 500mm
Max Turning Diameter 420mm
Standard Turning Diameter 205mm
Max Turning Length 560mm
Max Part Weight 230kg
Hole Through Drawtube 65.5mm
Hole Through Spindle 76mm
Motor Output (Cont.) 11kW
Motor Output(30 min) 15kW
Spindle Drive System Direct Belt Drive
Spindle Speeds 40-4,000rpm
Spindle Torque (Cont.) 210Nm
Spindle Torque (30 min) 287Nm
Max X Axis Travel 230mm
Max Z Axis Travel 600mm
X/Z Axes Rapids 20m/min
Turret Stations 12
OD Tool Shank Size 25mm
ID Tool Shank Size up to 40mm
Live Tooling Stations 12
Live Tooling Torque 22Nm
Live Tooling Drive Motor 4.5kW
Y Axis Travel +/- 55mm
Sub Spindle Chuck Size 6″
Hole Through Sub Spindle 46mm
Sub Spindle Nose A2-5
Sub Spindle Motor Output (Cont.) 5.5kW
Sub Spindle Motor Output (30 min) 7.5kW
Spindle Drive Built-in Motor
Spindle Speed Range 60-6000rpm
Z2 Axis Travel 600mm
Z2 Rapid Speed 24m/min
Machine Dimensions 3430x1810x2260mm
Weight 5800kg
Goodway GS-260MYS CNC Lathe
Machine Type: CNC Lathe with Sub Spindle, Driven Tools, Y Axis & C Axis.
Year: 2006
Control: Fanuc Series 18i-TB
Condition: Very Good
Includes
Selection of Driven Tool Holders
Selection of Manual Tool Holders
2 x Chucks
Swarf Conveyor
Technical Specification
Chuck Size: 10″(250mm)
Bar Capacity: 65mm
Spindle Nose: A2-8
Max Swing: 650mm
Swing over Saddle: 500mm
Max Turning Diameter: 420mm
Standard Turning Diameter: 205mm
Max Turning Length: 560mm
Max Part Weight: 230kg
Hole Through Drawtube: 65.5mm
Hole Through Spindle: 76mm
Motor Output (Cont.): 11kW
Motor Output(30 min): 15kW
Spindle Drive System: Direct Belt Drive
Spindle Speeds: 40-4,000rpm
Spindle Torque (Cont.): 210Nm
Spindle Torque (30 min): 287Nm
Max X Axis Travel: 230mm
Max Z Axis Travel: 600mm
X/Z Axes Rapids: 20m/min
Slideway Type: Hardened & Ground Box Ways
Turret Stations: 12
OD Tool Shank Size: 25mm
ID Tool Shank Size: up to 40mm
Live Tooling Stations: 12
Live Tooling Torque: 22Nm
Live Tooling Drive Motor: 4.5kW
Y Axis Travel: +/- 55mm
Sub Spindle Chuck Size: 6″
Hole Through Spindle: 46mm
Spindle Nose: A2-5
Motor Output (Cont.): 5.5kW
Motor Output (30 min): 7.5kW
Spindle Drive: Built-in Motor
Spindle Speed Range: 60-6000rpm
Z2 Axis Travel: 600mm
Z2 Rapid Speed: 24m/min
Machine Dimensions: 3430x1810x2260mm
Weight: 5800kg
Note: Tools in photos not included. Only the holders are included
