GMC GML-32120 Universal Lathe
Heavy Duty Precision Gap Bed Lathe 32” x 120” 4-1/8” bore, 15HP Motor. Free Taper Attachment and SINO DRO installed!
-
Standard Features
- ISO 9001 certified
- Large spindle bore 4-1/8”
- 4-way rapid traverse on Longitudinal and cross ways
- All dual inch/metric dials.
- solid cast iron machine base
- Heavy Duty main motor 15 HP
- 12 spindle speeds from 25-1,600 rpm
- 54 kinds of inch threads and metric threads
- Threading and feeding rate change by levers
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- Tools box with leveling pads
- One year warranty for parts
-
Specifications
Max. swing over bed 32” Max. length of workpiece 120” Max. swing over cross slide 22-7/16” Max. Swing in gap 40-1/2” Width of Bed 16” Effective length in gap to spindle 10” Effective length in gap to chuck jaws 7” Spindle bore 4-1/8” , D1-8 Taper of spindle center MT#5 with1:20 reducing sleeve Spindle speeds 25-1,600 rpm / 12 steps Longitudinal feeds 0.0016-0.055 IPR, 60 kinds Cross feeds 0.0008-0.027 IPR, 60 kinds Inch threads 80-7/16”TPI, 54kinds Metric threads 0.45-120 mm , 54 kinds Module threads 0.25-60 mm, 46 kinds Diameter pitch threads 60-0.25 DP , 42 kinds Max. travel of top slide 9-1/8” Max. travel of cross slide 16-1/2” Longitudinal rapid traverse 18 ft / min. Cross rapid traverse 8 ft / min. Diameter of tailstock quill 3-1/2” Max. travel of tailstock quill 9-1/4” Taper of tailstock quill center M.T. # 5 Max. weight of workpiece 2,000 LBS 4-way tool post size 1” x 1” Longitudinal leadscrew diameter / pitch Diameter: 3” Pitch: 2 TPI Main Motor 15 HP, 220V/40A / 440V/20A, 3 phase, prewired on 220V Rapid traverse motor 1/3 HP, 220V/440V, 3 phase, prewired on 220V Coolant pump motor 1/8 HP,220V/440V, 3 phase, prewired on 220V Machine weight, approx. 10,650 LBS Overall dimensions, LxWxH 185” x 48” x 67” -
Standard Equipment
- Free SINO DRO, installed
- Free Taper turning attachment, , installed
- 12” 3-jaw chuck with top reversible jaws
- 16” 4-jaw chuck
- 20” Face plate
- 10” drive plate
- ¾”-7-1/2” steady rest with roller jaws
- 1”-5” follow rest
- Removable gap
- 4-way tools post
- Chuck guard with safety shut off
- Foot brake
- Halogen Work light
- coolant system
- Full length rear splash
- (2) dead centers and (1) reducing sleeve
- Thread chasing dial
- Tool box and leveling pads
-
Optional Equipment
- 7-1/2” to 15-1/4” large steady rest with roller jaws
- ALORIS type QC tool post set # 900-0051-500, 6 pcs
- Live center for tailstock MT# 5, part# 900-0050-05
