| Specification |
Metric |
Imperial |
| Maximum Workpiece Diameter |
400 mm |
15.74″ |
| Maximum Grindable Profile Depth |
35 mm |
1.37″ |
| Maximum Grinding Wheel Diameter |
350 mm |
13.77″ |
| Maximum Grinding Wheel Width |
50 mm |
1.96″ |
| Spindle Journal Diameter (Retaining) |
80 mm |
3.14″ |
| X-Axis Travel (Radial) |
440 mm |
17.32″ |
| Y-Axis Travel (Tangential) |
200 mm |
7.87″ |
| Z-Axis Travel (Axial) |
400 mm |
15.74″ |
| Grinding Head Pivoting Angle (+A / -A) |
± 40° |
| Maximum Table Load |
10 kN |
2,248 lbs |
| Worktable Diameter |
380 mm |
14.96″ |
| Worktable Bore |
80 mm |
3.14″ |
| Tailstock Travel Distance |
650 mm |
25.59″ |
| Tailstock Locating Bore |
90 mm |
3.54″ |
| Feed & Rapid Traverse (X-Axis) |
10,000 mm/min |
393.70 IPM |
| Feed & Rapid Traverse (Y-Axis) |
5,000 mm/min |
196.85 IPM |
| Feed & Rapid Traverse (Z-Axis) |
10,000 mm/min |
393.70 IPM |
| Tool Spindle Speed (S-Axis) |
600 – 6,000 RPM |
| Worktable Speed (C-Axis) |
0 – 32 mm/min |
0 – 1.25 IPM |
| Dresser Travel Distance (Z2-Axis) |
200 mm |
7.87″ |
| Dresser Feed & Rapid Traverse (Z2-Axis) |
5,000 mm/min |
196.85 IPM |
| Dresser Spindle Speed (S2-Axis) |
3,000 – 6,000 RPM |
| Maximum Dressing Wheel Diameter |
150 mm |
5.90″ |
| Approximate Machine Dimensions (L × W × H) |
3,658 × 2,591 × 3,048 mm |
144″ × 102″ × 120″ |
| Approximate Filtration System Dimensions (L × W × H) |
1,829 × 3,454 × 2,515 mm |
72″ × 136″ × 99″ |
| Approximate Control Cabinet Dimensions (L × W × H) |
1,067 × 1,829 × 2,235 mm |
42″ × 72″ × 88″ |
