← Back to Machine List

Gleason 516 Hypoid Lapper – Year 1960s

Gleason 516 Hypoid Lapper – Year 1960s

Max. Gear Diameter: 24″
Max. Pinion Diameter: 12″
Offset of Gear Spindle Above or Below: 6″

Pinion Spindle
Diameter of Taper Hole at Large End: 2 29/32″
Taper per Foot: 39/64″
Depth of Taper: 3″
Diameter of Hole Through Spindle: 3.740″

Gear Spindle
Diameter of Taper Hole at Large End: 2 19/64″
Taper per Foot: 1/2″
Depth of Taper: 3″
Diameter of Hole Through Spindle: 2.167″

Electrical at 60 Cycle
Main Motor: 5 H.P./1800 R.P.M.
Hydraulic Motor: 3/4 H.P./1800 R.P.M.
Lapping Compound Pump Motor: 1 H.P./1200 R.P.M.
Oscillating Drive Motor: 1/4 H.P./ 0 to 1725 R.P.M.

Dimensions: 85″x82″x82″
Weight: 11,200 Lbs

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany Used Machines For Sale
16/01/2026 • 3 min read

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany

Below is a practical, step-by-step guide for evaluating a used / second-hand / surplus / pre-owned KAPP NILES KS 2003…

Read Guest Post →
Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →