← Back to Machine List

GLEASON 24A Gear Hobbing Machine Universal Bevel CONIFLEX Straight

GLEASON 24A Gear Hobbing Machine Universal Bevel CONIFLEX Straight

Condition:used
Longest cone distance (1 3/4″ stroke):18″ (457MM)
Shortest cone distance:0″
10 to 1 ratio:35.5″ (901MM)
2 to 1 ratio:31.75″ (805MM)
1 to 1 ratio:25″ (635MM)
Minimum pitch angle:5.42 DEGREES
Extreme ratio:10 TO 1
Maximum pitch:1.25 DP (20.4 MODULE)
Maximum pitch angle (shafts at 90 degrees):84.18 DEGREES
Maximum face length:6″ (152MM)
Diameter (large end of taper):6″ (152MM)
Taper per foot:.75″ (18MM)
Depth of taper:6″ (152MM)
Diameter of thru bore:5” (127MM)
Spindle nose to machine center:5”-26” (127-660MM)
Cutter speeds (strokes per minute):22 TO 170
Feeds (seconds per tooth) (22 feeds):23 TO 645
Floor space required:74″ X 105″ (1880X2660MM)

Machine net weight:24,400 LBS. (11,295 KGS)

COMBINATION ROUGHER/FINISHER, SUITABLE FOR “GENERAL JOBBING”
PRODUCTION OF STRAIGHT BEVEL (CONIFLEX/CROWN) GEARS UP TO 35.5
(901MM) PITCH DIAMETER, (AT 10:1 RATIO), 6″ (125MM) FACE-WIDTH,
WITH CUTTING CAPABILITY UP TO 1.25 DP (20.4 MODULE)

EQUIPMENT / FEATURES:
UNIVERSAL FEED CAM, DOUBLE-TRACK, FOR ROUGHING
AND/OR FINISHING WORK
HYDRAULIC CHUCKING ATTACHMENT (LESS DRAW-BAR & NUT)
SELF-CONTAINED HYDRAULIC SYSTEM
COUNTER/STOP
STOCK DIVIDING GAUGE
ROUGHING YOKE & BUSHING
FINE-FEED ADJUSTMENT FEATURE
ONE SINGLE SET-UP OF CHANGE GEARS
FOR INDEX, ROLL, RATIO OF ROLL, FEED AND SPEED
GLEASON AUTO-STOP
GUARDS/COVERS AND OPERATORS STEP PLATFORM
FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS)

NOTE: PREVIOUS OWNER ADVISES SLIDES WERE REBUILT by a company APPROXIMATELY ONE YEAR AGO.

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Avoid Costly Mistakes: Professional Tips for Purchasing a Pre-Owned, Surplus, Second-Hand, Used HARDINGE-BRIDGEPORT V-1000 CNC Vertical Machining Center made in USA Used Machines For Sale
12/04/2026 • 3 min read

Avoid Costly Mistakes: Professional Tips for Purchasing a Pre-Owned, Surplus, Second-Hand, Used HARDINGE-BRIDGEPORT V-1000 CNC Vertical Machining Center made in USA

Professional Buyer Guide – Avoid Costly Mistakes Machine Overview & Technical Specifications The Hardinge Bridgeport V-1000 is a high-performance vertical…

Read Guest Post →
What Should I Pay Attention To When Buying a Second-Hand, Pre-Owned, Surplus, Used Anayak Anak Matic-7 CNC Vertical Machining made in Spain? Used Machines For Sale
08/04/2026 • 3 min read

What Should I Pay Attention To When Buying a Second-Hand, Pre-Owned, Surplus, Used Anayak Anak Matic-7 CNC Vertical Machining made in Spain?

When evaluating a second-hand Anayak Anak Matic-7 CNC Vertical Machining Center (Spain), you should approach the purchase from both a…

Read Guest Post →
What Industry Experts Recommend Before Purchasing a Pre-Owned, Second-Hand, Surplus, Used INDEX MS 42C CNC MultiSpindle Lathe 6 Spindles  made in Germany? Buying Guide
03/04/2026 • 3 min read

What Industry Experts Recommend Before Purchasing a Pre-Owned, Second-Hand, Surplus, Used INDEX MS 42C CNC MultiSpindle Lathe 6 Spindles  made in Germany?

The INDEX MS 42C is a German-engineered CNC multi-spindle automatic lathe designed for high-volume, precision turned parts production. It is…

Read Guest Post →